Can anyone point me in the correct direction to either one
Thanks
Saul
Can anyone point me in the correct direction to either one
Thanks
Saul
2003 Mercury Marauder 300A#4821 of 7838
Stock block marauder
400hp 440trq
Here ya go
http://naake.com/
Try Eaton springs for lowering.
I put coil overs in and maybe because they were the wrong spring rate - every six months I had to adjust them. after 4 years they were shot. I went back to original set up, cutting 1 coil off the original springs, I like it better.
Steven
2004 Marauder Black, loaded
Vortec S/C
4.10s
3500 PI Stall
Kook's headers
476.9 rwhp 385 lbs/tq
KVR's, QA1's, M&Z control arms, rear sway bar
Lidio tune
2004 Suburban Dark Charcoal
1970 W-30 442 convertible twilight Blue
From The Farm of The Hackster
64 Corvair 4dr
64 Corvair Conv
65 GTO
77 F250 Camper Special
92 Noch Back Stang FOR SALE
93 Buick LeSabre
01 Wrangler
04 Marauder DTR
Original springs 1 coil cut.
Eibachs are WAY TOO ROUGH for our roads out here.
Previous
2003 DPB 232 fo 328.
Do you only cut 1 coil cut for the front and the back or just the back? Can that be done by your local mechanic, or is this something that's specialized and has to be fabricated to fit your car? Or is it just that simple cutting 1 coil length off the front and back. I think this looks really cool on the car. Does anyone have pictures with just the stock rims with the car lowered?
just cut the front springs, the back can be lowered by moving the height adjustment sensor to the left or right (there is a bunch of threads about that - no back springs just air bags). So yes, your local mechanic can cut 1 coil off the fronts and it will look great. Check out my thread about the Firehawk tires and you will see the stance of my car.
http://www.mercurymarauder.net/forum...ad.php?t=81858
Steven
2004 Marauder Black, loaded
Vortec S/C
4.10s
3500 PI Stall
Kook's headers
476.9 rwhp 385 lbs/tq
KVR's, QA1's, M&Z control arms, rear sway bar
Lidio tune
2004 Suburban Dark Charcoal
1970 W-30 442 convertible twilight Blue
Lifespeed
2004 Silver Birch Marauder 130K miles
Wilwood Aero6 F, NMDP R brakes, Penske 7500DA shocks, Hypercoil 600lbs F and Grand Marquis R air springs, Addco tubular sway bars, Metco control & Watts, 31 sp axles, Stainless Works cat-back exhaust, Lidio tune, American Racing AR883 9.3" 50mm F 10" 59mm R 20" wheels, Pirelli P-Zero 265/35-20, 275/40-20 tires
Coming soon: Livernois 5.0L stroker, ADTR/Vortech V2 intercooled SC, Silverfox trans and Circle D converter
Oh man, QA1 have a horrible reputation for their coil over setups in Mustangs. At least around here.
You're better off sticking with a modified factory coil or the ebach's
Matt H.
(sold)2004' SB, 268rwhp/295tq
1990 Mustang GT, Dart 363, Si-trim, T56, Holley Terminator X. 622rwhp/527tq
2003 SVT Cobra, Posi Port 497rwhp/481tq. SCT Pro Racer Pack.
2017 F-150, 5.0
2013 SHO DIB Performance Pack
There are currently 1 users browsing this thread. (0 members and 1 guests)