Results 1 to 11 of 11

Thread: John`s Merc in action

  1. #1
    Join Date
    Sep 2002
    Location
    Harrison Twp. Michigan
    Age
    72
    Posts
    3,665

    John`s Merc in action

    http://www.youtube.com/watch?v=MC5qm_JhHUMI don`t know if you have seen this John but I found it looking around
    Last edited by Hack Goby; 07-24-2007 at 08:43 AM.

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    That's great! More cooked rice
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Apr 2006
    Location
    Long Island
    Age
    59
    Posts
    3,026
    Quote Originally Posted by fastblackmerc View Post
    That's great! More cooked rice
    He should be making frozen drinks with that blender

    '98 MGM LS...sold..................... .............................. ..'03 300A...sold 6/17

  4. #4
    Join Date
    Sep 2002
    Location
    Washington DC
    Age
    66
    Posts
    4,742
    Nice run john, that was lunch, what was for dinner ?


    James Brown #140 "Say It Loud" Except in Bristol
    Merc's Garage
    MagnaFuel ProTuner Series 750 MP-1403
    Stainless Steel Works full exhaust
    SCT Advantage III Ford Pro Racer Software
    600.59 rwhp 559.91 Torque @ 20 lbs Boost
    2.3 Whipple Intercooled Supercharger
    BC Automotive Stage4 transmission
    03 Terminator built by Chris Vining

  5. #5
    Join Date
    Sep 2002
    Location
    Harrison Twp. Michigan
    Age
    72
    Posts
    3,665
    Quote Originally Posted by merc View Post
    Nice run john, that was lunch, what was for dinner ?
    It was close at the end.

  6. #6
    Join Date
    Oct 2005
    Location
    West 'burbs Chicago
    Age
    36
    Posts
    3,823
    Had to actually turn down my speakers when my eardrums started ringing from that garbage exhaust on the ricer..
    -----------------------------------------------------------------------------------

    '04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
    '21 F150 XLT 5.0 Sport
    '18 Chevy Malibu Redline
    '15 Mustang GT, performance package
    '01 BMW 740i M-Sport, manual swapped
    '97 Lincoln Town Car (black on black)
    '10 Harley Ultra Limited
    '08 Kawasaki ZX6R
    '03 Grand Marquis(sold)

  7. #7
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Ive seen that before, look i even put up an intelligent comment


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  8. #8
    Join Date
    Aug 2006
    Location
    MA
    Age
    36
    Posts
    5,893
    Your car moves pretty good John, what else do you have besides the MM engine? Is the engine "tampered" with?
    '03 A #1801 - Tuned By Outlaw Dyno
    445rwhp/408rwtq - 12.6/110mph
    DR Vortech NOIC #5
    Sold
    '88 Mustang LX - Built 306ci, built AOD, built 8.8"
    '11 F250 Powerstroke - 476hp/1208tq

  9. #9
    Join Date
    Jul 2006
    Location
    South Haven, Mich.
    Age
    71
    Posts
    6,071
    The valve covers have never been off. It has a 4.10 gear and a tricked out transmision with a 3200 stall converter. Underdrive pulleys MSD ignition Kooks headers Stage 2 intake manifold and a good tune. 310 HP at rear wheels 323 torque. 13.56 best ET.
    [SIGPIC]

  10. #10
    Join Date
    Aug 2006
    Location
    MA
    Age
    36
    Posts
    5,893
    Damn man that's good. How come some of us MM guys can't even accomplish over 300 at the rear wheels with a lot more invested? Also what do you mean by a Stage 2 intake manifold? I thought there was no other manifolds for our engine?
    '03 A #1801 - Tuned By Outlaw Dyno
    445rwhp/408rwtq - 12.6/110mph
    DR Vortech NOIC #5
    Sold
    '88 Mustang LX - Built 306ci, built AOD, built 8.8"
    '11 F250 Powerstroke - 476hp/1208tq

  11. #11
    Join Date
    Jul 2006
    Location
    South Haven, Mich.
    Age
    71
    Posts
    6,071
    Its a extruded honed intake and is stock from the outside. Use the search for more info. They are expensive and the gain on HP is not a lot. The headers and the intake added 27 hp. They were put on at the same time.
    [SIGPIC]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. *** Happy Birthday Merc 406 ***
    By Cobra25 in forum Sunshine State Marauders
    Replies: 3
    Last Post: 04-07-2007, 12:22 PM
  2. 1965 merc
    By hotmerc65 in forum The Classic Lounge
    Replies: 27
    Last Post: 03-15-2007, 07:37 PM
  3. MERC stopped by.
    By CBT in forum Community Discussion
    Replies: 5
    Last Post: 10-30-2005, 06:28 PM
  4. Merc meets Merc
    By DEFYANT in forum Community Discussion
    Replies: 19
    Last Post: 01-11-2005, 07:52 PM
  5. merc maruader vs. police interceptor
    By scottycopcar in forum Community Discussion
    Replies: 35
    Last Post: 08-17-2004, 06:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •