Your all good in my book Bill
Senior Member
Your all good in my book Bill
Senior Member
Originally Posted by RacerX
Lol, Lazarus for now...
P.S. At least I didn't rip people off like the other companies.
That was the real reason I started this.
To find BETTER parts and undercut the big boys.
$10 in parts...
Not to mention, these are in lots of different Ford cars all over the country
Mr. Lazarus welcome back lol. You back providing the modded FPDM's? I have two stock units. Would be cool to get two if your units to run my two Aeromotive 340 pumps.
Sent from my iPhone using Tapatalk
2003 300A Black MM
FRPP ALUMINATOR MOTOR 10:1
BC AUTOMOTIVE TRANNY 2800 STALL
TRILOGY S/C WITH POSI PERFORMANCE PORT
STAINLESS WORKS LT HEADERS
METCO REAR CONTROL ARMS AND WATTS LINK
ADDCO FRONT & REAR SWAY BAR
MONROE HD QUICK STRUTS FRONT
QA1 ADJUSTABLE REAR SHOCKS
EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
ZACKS BIG BRAKE SWAP w/ TCE SS LINES
SCANGAUGE MONITORING....^....^....^
ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP
Everything Marauder, LEDs & HI
RacerX, please check your PM's.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
Still waiting on the replacement you promised for what, nearly 2 years ago now? Sent to the wrong address my ass. Man up and replace 2 of them at this point.TBoner has a problem with his car. That Black306, which is NOT as robust as mine (a highly qualified electronics engineer that has worked for BAE, Ratheon, NASA, and others did testing on the Black306 as well as other combos before coming up with these parts), WILL fail also. He has a problem with his car. There are close to a hundred of these out there. They are tested thoroughly in my own personal car before they ship out. I have this exact one in my car with dual pumps and the correct high current wiring mod with relay that is needed also.
Oh, a big thanks for giving those part numbers out, looks like that's one of the ones I didn't sand off before I figured I'd protect out work. Yes, there are more than a few parts that get upgraded internally. Have a nice day people!
Nothing wrong with my car at all. Poor workmanship or bad parts from a man who doesn't return messages and keep promises. When the first one failed you even admitted you thought you got some bad inductors.
If you are so worried about your secrets being shared then maybe you shouldn't disappear for so long and expect everyone to wait for your Highness to reappear to claim dibs on the part you USED to make and not stand behind.
Last edited by tbone; 09-21-2018 at 08:52 AM.
Senior Member
Nothing wrong with my car at all.
Wrong. Your car will fail again
Poor workmanship or bad parts from a man who doesn't return messages and keep promises.
Wrong on the workmanship. Board level work on electronics for 40 years bub. A child can do it. Correct on communicating with someone that shorted out TWO thoroughly tested components. This is why I also hesitated in this endeavor originally. I can't control mistakes made on your end, but, I'll get the blame and lose money.
You owe me $150.
At this point, I'm contemplating giving your money back on the condition that you're honest about coming forward when your 306 smokes and you give me the money back.
If you are so worried about your secrets being shared then maybe you shouldn't disappear for so long and expect everyone to wait for your Highness to reappear to claim dibs on the part you USED to make and not stand behind.
Oh, did I sound worried when I posted up the parts yesterday? You must be mixing sarcasm and DILLIGAF with true care. My apologies. I'll be a little more clear for those that are unable to get the true context. I was gone??? Not too mention, those sold like hotcakes without one return on other boards.
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Senior Member
Screw it to the trunk and plug it in. Really hard.
I've been driving the car a lot lately. No issues. We will see.
The second one that failed had a bad solder joint. I should have taken a picture obviously. You also said you thought you got some bad capacitors or inductors.
I guess 40 years practice isn't enough.
Yes, you did sound pissed that someone posted the parts numbers and that you forgot to sand it off.
Yes, you were gone. I believe your response to my query on you was "I'm here. Kind of."
Agreed.
Last edited by tbone; 09-21-2018 at 10:14 AM.
Senior Member
Senior Member
The second one that failed had a bad solder joint. I should have taken a picture obviously.
Obviously. I know for a fact is wasn't my solder joints.
One of the components Ford put on the board, not myself, yes.
Every solder point on my connections are through and through from one side to the other and the flux cleaned off.
I guess 40 years practice isn't enough.
Whatever, see my response above.
Yes, you did sound pissed that someone posted the parts numbers and that you forgot to sand it off.
Whatever, see post above.
Yes, you were gone. I believe your response to my query on you was "I'm here. Kind of."
Agreed.
Lol, ok, all knowing...
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Senior Member
Uh, yeah.... I believe everything I read too.
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Senior Member
The bad solder joint was for the inductor THAT YOU INSTALLED AND THAT YOU ADMITTED YOU GOT SOME BAD ONES.
Last edited by tbone; 09-21-2018 at 10:13 AM.
Senior Member
WTF does this mean? I simply quoted your lame response.Uh, yeah.... I believe everything I read too.
Did some imposter write "I'm here. Kinda". Or is the whole thread fake?
Everything Marauder, LEDs & HI
Just an FYI....
Got RacerX's OK to start modifying the FPDMs.
Parts are ordered. Will post when parts are here and I've modded and tested the two FPDMs I have.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
Anyone up for an Alabama Hot Pocket?
CBT? Joe?
Last edited by justgod; 09-21-2018 at 11:49 AM.
Senior Member
I admitted that I got some bad solder joints??? Y U YELLIN BRO? An inductor is a piece of copper coiled up. They only go bad when you COOK THE SNOT OUT OF THEM!!!
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
Senior Member
Enough of this. I really don't like this. TBoner, how's this?
You run that 306 for two months, drive the car like normal.
If it doesn't fail, I'll paypal you the $150. Deal? I
put it out here for everyone to see.
No messaging or texting behind closed doors.
Full transparency. Like the government
11.931 @ 116.33 (MT ET Streets)
12.073 @ 118.43 (Nitto 555)
I love the smell of Nitromethane and rubber in the morning!
Drag racers prayer:
As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
