I just purchased a 200 Amp alternator to use on my CV. My CV currently has a 4G 110 amp alternator. The current (large) 3 wire plug has color coded wiring. I have the wiring diagrams for the 4G. I don't want to burn up my system by wiring the new connector wrong.
I don't have a wiring diagram for the 6G alternator. I'm assuming the pin out is the same as the 4G just with a smaller connector plug. The new (small) 3 wire connector pigtail has three black wires, no color coding, so I don't know which is pin 1.
My question is; Where is pin 1 in the voltage regulator connector, is it the pin closest to the large red output lug, (on the right looking at the alternator from the back)?
I don't want to burn up my system by wiring the new connector wrong.