Page 1 of 5 12345 LastLast
Results 1 to 15 of 73

Thread: Eaton Swap #11

  1. #1
    Join Date
    Aug 2009
    Location
    Maryland
    Age
    39
    Posts
    141

    Eaton Swap #11

    Hey all...I've finally had time to do a little write up and post pics...This is a very busy week for me.. As I work fulltime then start working on my car right after...I got the brackets, serp belt, fuel pump, spark plugs, cooling mod, powerder coated valve covers, lower blower pulley, custom coolant T fitting and I think thats it.. so far!! I was thinking I could make the stock MM battery tray work but its seems to be more trouble going that route..I modified the lower intake and passenger side coolant mod fitting as well..

































    Not everyones brake fluid can be as clean as Dooms all the time....LOL
    Last edited by SmokdMercRauder; 04-29-2010 at 04:15 AM.
    Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...

    91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....

  2. #2
    Join Date
    Sep 2008
    Location
    LOVES PARK IL
    Posts
    406
    Looking good dude, keep the pics coming.

  3. #3
    Join Date
    Mar 2009
    Location
    North Aurora, IL
    Age
    49
    Posts
    11,836
    Yeah baby!! Looks sweet!!





    Great quotes!!
    Quote Originally Posted by CBT View Post
    you were too busy getting your ass kicked by cool people because you suck and are a worthless excuse for a human being.
    Quote Originally Posted by CBT View Post
    I'm going to punch you so hard between the legs your going to need a GYNA BO to fix it!!
    Quote Originally Posted by Haggis View Post
    Eat poo poo and die heathen.

  4. #4
    Join Date
    Nov 2007
    Location
    NorCal
    Age
    50
    Posts
    3,209
    Sweet another eaton swap! Looking good man.
    2003 Mercury Marauder 300A
    FRPP BOSS50 Block w/MMR 900S Stroker 5.3L DOHC 324ci 10:1cr - (321rwhp/360.5rwtq) - Tuned by AED

    2006 Ford Mustang GT
    FRPP FR3 Handling Pack|FRPP X Pipe w/GTA Exhaust|Steeda CAI|Hurst Shifter
    (289rwhp/307rwtq)

    2003 Chevrolet Suburban 2500 LQ4 6.0L LT 4WD
    Cognito leveling Kit, Fox 2.0, BFG KOA2 Radial All Terrains, Magnaflow, K&N and 4.10 gears

  5. #5
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Looking good! I finally got to see your JBA's

  6. #6
    Join Date
    Aug 2009
    Location
    Maryland
    Age
    39
    Posts
    141

    JBA and Silicone question

    yea I finally got to take a pic of them from the top...even though that pic was from a cell phone.. More pics on the way later tonight...did all you eaton guys just silicone the intercooler to the blower and the blower to intake?? I have a gasket for the blower to intake....Was just wondering...Seems like I've seen silicone everywhere on most of the eaton swaps...
    Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...

    91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....

  7. #7
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Quote Originally Posted by SmokdMercRauder View Post
    yea I finally got to take a pic of them from the top...even though that pic was from a cell phone.. More pics on the way later tonight...did all you eaton guys just silicone the intercooler to the blower and the blower to intake?? I have a gasket for the blower to intake....Was just wondering...Seems like I've seen silicone everywhere on most of the eaton swaps...


    Use Aenerobic Gasket Maker...Blue tube..kinda pricey...made by Permatex

    Did you pull the engine to install the headers and Cam covers?

    Looks good!

  8. #8
    Join Date
    Oct 2004
    Location
    Cape Cod, MA
    Age
    67
    Posts
    2,601
    I love your cross over tube T mod. With that extra weight your ET will be slower than mine. Nice work keep the photos comming.
    2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
    2003 marauder black 28,000 miles all stock. Garage Queen.
    2004 marauder red daily driver.

  9. #9
    Join Date
    Aug 2009
    Location
    Maryland
    Age
    39
    Posts
    141

    valves covers

    Quote Originally Posted by Zack View Post
    Use Aenerobic Gasket Maker...Blue tube..kinda pricey...made by Permatex

    Did you pull the engine to install the headers and Cam covers?

    Looks good!

    LOL....No thats my other motor.. I just set the valve covers on it, I stole them off of it in the first place!!!
    Last edited by SmokdMercRauder; 04-29-2010 at 08:34 AM.
    Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...

    91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....

  10. #10
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    You are a brave man welding steel to cast iron.

  11. #11
    Join Date
    Aug 2009
    Location
    Maryland
    Age
    39
    Posts
    141

    t mod

    both pieces are steel
    Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...

    91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....

  12. #12
    Join Date
    Oct 2007
    Location
    CA
    Posts
    525
    I used the same "T" pipe coupler from the hardware store with our welding anything, I just slipped the hoses on and clampped...

    Looking good!

  13. #13
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    lookin good man. any Qs you got my number
    2010 fusion se


  14. #14
    Join Date
    May 2007
    Location
    Massapequa Park
    Posts
    585
    Yeah any questions you got Daves number, fell free to call him any time day or night, he prefers early morning 4-5 oclock. You have my permission

  15. #15
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    Quote Originally Posted by tjl006 View Post
    Yeah any questions you got Daves number, fell free to call him any time day or night, he prefers early morning 4-5 oclock. You have my permission

    all calls after midnight will be automatically forwarded to Tom
    2010 fusion se


Page 1 of 5 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Eaton swap #10...
    By jdenning002 in forum Power Adders
    Replies: 96
    Last Post: 02-25-2011, 07:49 AM
  2. For Sale Complete Eaton Swap
    By tjl006 in forum Marauder-specific Parts for Sale
    Replies: 43
    Last Post: 06-29-2010, 07:20 AM
  3. eaton swap questions
    By bocat187 in forum Power Adders
    Replies: 13
    Last Post: 04-25-2010, 02:05 PM
  4. Eaton Swap
    By tjl006 in forum Power Adders
    Replies: 96
    Last Post: 02-17-2010, 09:30 AM
  5. Looking to swap in an Eaton?
    By O's Fan Rich in forum The Lounge
    Replies: 12
    Last Post: 04-10-2009, 06:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •