My car only has 30k on it, the car stops well and did not pull but the pedal seemed a bit low, like the brakes dont catch untill half way down with the pedal. I figured i would give the brakes a freshening and put on all new pads and get the rotors surfaced. I also flushed all the old fluid out, I feel pretty good about not getting any air in the system. Got it all completed and it feels exactly the same. All the pads i removed looked real good and the rotors cleaned up nicely. So whats next? master cyl? anything im missing? Im thinking of re-bleeding it all again to be sure about that.. I see in an old post someone mentioned braking on a gravel road to cycle the abs pump in case there was air in it?
Any thoughts?