Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Got some new bling for my latest project

  1. #1
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338

    Got some new bling for my latest project

    I picked up a set of 2003 cam covers from Guittard22 a while back (thanks Chris!!!) to powder coat in a color. Figured doing my latest project this was perfect time to finally do so.

    Picked as close as my eyeball could determine in the dim light to Ford Racing blue.

    Turned out better than I expected! Very pleased with results.



    Sent from my iPhone using Tapatalk

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  2. #2
    Join Date
    Oct 2008
    Location
    Massachusetts
    Age
    32
    Posts
    900
    Looking good! I almost did the same but ended up going with wrinkle black, that blue will look killer!

  3. #3
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by crownvic97 View Post
    Looking good! I almost did the same but ended up going with wrinkle black, that blue will look killer!

    I would have preferred FRB in wrinkle but didn't have the option.


    Maybe next time.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  4. #4
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Now you need all new hardware!


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  5. #5
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    Dude.... That s SICK!

    Now you are committed! Love it!


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  6. #6
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by justbob View Post
    Now you need all new hardware!


    Sent from my iPhone using Tapatalk Pro

    Got the Ford Racing COP covers to go with them.


    After Louisville I'll be installing the headers.


    Then if all goes according to plan late summer yields full exhaust & new tune.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  7. #7
    Join Date
    Jul 2004
    Location
    " Da Heights "
    Age
    57
    Posts
    1,742
    Those look awesome my friend! Congrats on a great color pic.


    Charlene

    DOB -5/26/03
    # 7525 of 7838 for 2003
    She is # 261 of 417 -Silver Birch

    Trilogy #188
    5.0 Lidio Stroker Motor
    466 HP/ 443 TQ
    "On a conservative 93 Octane tune!"

    Ed "Baaad GN" Linthicum
    RIP 8-6-2014
    I love you dad!

  8. #8
    Join Date
    Oct 2011
    Location
    Westport, Ma
    Age
    39
    Posts
    3,913
    Quote Originally Posted by MyBlackBeasts View Post
    I picked up a set of 2003 cam covers from Guittard22 a while back (thanks Chris!!!) to powder coat in a color. Figured doing my latest project this was perfect time to finally do so.

    Picked as close as my eyeball could determine in the dim light to Ford Racing blue.

    Turned out better than I expected! Very pleased with results.



    Sent from my iPhone using Tapatalk
    Looks amazing- they look just as good as mine and I paid a lot more than you did from me. Glad you got around to getting them done. You got them from me in 2013 (6years ago)
    crazy time. Fly's.

    https://www.mercurymarauder.net/foru...ad.php?t=87731


    Yours came out bright vs mine

    Sent from my SM-N960U using Tapatalk
    2003 MM 300A
    #738 of 7,838 BLK
    Build date: 6/6/2002
    Adopted: 2/05/2013

    MODS:

    Metco control arms, Addco sway bars, TCE brake lines, Gatorback belt, remote start, underbody lights, custom doorsills. Black with custom silver hood stripes (S-55 theme)

    2004 CV LX SPORT
    ALL BLACK, 6 DISC, TUNED MZT
    Adopted on12/09/18 from chief455




    COMING SOON-Trilogy #005 THANKS CWright-
    I am afraid you have awakened a sleeping Giant


    http://www.mercurymarauder.net/forum...=view&id=14156

    Quote Originally Posted by MOTOWN MARAUDER View Post
    Im happy for you bro! Let the mods begin! I hear the mod bug broke his stinger when he heard you pulled the trigger!

    BIG BIG thanks to the GOD of marauder parts ( Darren) I am the 1st winner of Darren bag of fun give-away

  9. #9
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by MyBlackBeasts View Post
    Got the Ford Racing COP covers to go with them.


    After Louisville I'll be installing the headers.


    Then if all goes according to plan late summer yields full exhaust & new tune.


    Why wait? 4-6 hours and done! Looking great Bill!


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  10. #10
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Guittard22 View Post
    You got them from me in 2013 (6years ago)
    crazy time. Fly's.



    Sent from my SM-N960U using Tapatalk

    After 15 years of seeing the same big olé thing laying around taking up space and swallowing your wallet whole you get creative ideas on how to dress her up but more and more limp to actually jack her up, pull out your hammer, and go to town on her.

    That may have come out wrong?


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  11. #11
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by justbob View Post
    Why wait? 4-6 hours and done! Looking great Bill!


    Sent from my iPhone using Tapatalk Pro


    Time is the issue. It's taken me a ridiculous amount of time to do this cam swap. I'm just focused on getting it running again for Looseville.

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  12. #12
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by MyBlackBeasts View Post
    Time is the issue. It's taken me a ridiculous amount of time to do this cam swap. I'm just focused on getting it running again for Looseville.


    I think I’ll be putting mine up for sale shortly. Jon Bond just called, my blower is officially a neat paper weight. I’m done.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  13. #13
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    Quote Originally Posted by justbob View Post
    I think I’ll be putting mine up for sale shortly. Jon Bond just called, my blower is officially a neat paper weight. I’m done.


    Sent from my iPhone using Tapatalk Pro
    Not fixable?
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  14. #14
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    Quote Originally Posted by justbob View Post
    I think I’ll be putting mine up for sale shortly. Jon Bond just called, my blower is officially a neat paper weight. I’m done.


    Sent from my iPhone using Tapatalk Pro
    Bummer! Did they day what happened and why?

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  15. #15
    Join Date
    Oct 2008
    Location
    Massachusetts
    Age
    32
    Posts
    900
    Quote Originally Posted by justbob View Post
    I think I’ll be putting mine up for sale shortly. Jon Bond just called, my blower is officially a neat paper weight. I’m done.


    Sent from my iPhone using Tapatalk Pro
    This is very sad, I hope your luck turns around and you decide to keep it!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. our latest project
    By ImpalaSlayer in forum The Lounge
    Replies: 4
    Last Post: 11-08-2009, 09:43 PM
  2. My latest project
    By Sully008 in forum Community Discussion
    Replies: 12
    Last Post: 06-20-2005, 08:57 AM
  3. My latest Project
    By MAD-3R in forum Community Discussion
    Replies: 29
    Last Post: 10-21-2004, 08:50 AM
  4. Project Bling, update
    By Donny Carlson in forum Community Discussion
    Replies: 6
    Last Post: 06-21-2004, 06:08 PM
  5. Project Bling Phase One
    By Donny Carlson in forum Community Discussion
    Replies: 18
    Last Post: 06-11-2004, 05:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •