Just ordered my new HID projector headlights and LED fog lights from Panther Lights.
Just ordered my new HID projector headlights and LED fog lights from Panther Lights.
Man those are really clean like the God Head logo on them. How much are they?
There are so many variables involved:
* buying new headlights or retrofitting the ones you have now?
* which HID ballast are you choosing? 35 or 55 watt?
* Which relay are you buying: standard or Cannbus?
* Buying Halo light rings?
Also, as Panther Lights is not an official vendor, it is best you contact Kevin on Facebook, Panther Lights.
Last edited by Lowndex; 05-19-2018 at 10:09 PM.
It would be really neat if you could project the God's Head like Batman!
To avoid head on collisions recc a headlight alignment.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
A lot. With the halo ring surround and demon eyes, D2S kit, marauder gods head etching, from 600 to 800, (thats retrofitting current housings, add 250-300 for aftermarket housings). Its very cool and you could see everything from your house to the moon with the lights he provides. Ive messaged him on fb, very professional and answered all my questions.
That’s crazy numbers considering it’s probably more than 10% of most Marauder’s values and 20% or more for most crown Vic’s... Obviously there is exceptions to that rule.
I’ll keep my candles..
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
The last person I would expect that argument from, how much is invested between your fenders?!
Kidding of course, that’s a ton of money for headlights and your argument is certainly valid considering most Marauder owners are now like 5th plus owners and bought the car for cheap.
The estimated numbers that were quoted up top were including the best projector kit I offer, as well as all the extras like Bluetooth controlled halos and demon eyes, and the etched lenses.
A basic HID projector build will cost $400. That includes the HID kit as well. The only catch to that is I would need the housings to work with, or money provided so I can order a set.
I apologize for not adding that the quality looks outstanding, and I’m quite sure you aren’t making near enough on them.
Very true. But after fabricating or paying absolute top dollar for everything on my car I’ve treated myself to mass produced F150’s! After the millions of choices of quality parts on the cheap available for it, I have lost all interest in the car anymore.
No matter my opinion, I appreciate his effort in providing options for other members here who haven’t dived down the rabbit hole quite yet.
Sent from my iPhone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
The advantage of Panther Lights is the number of customers and positive reviews. Kevin's work on the custom mounting brackets pays off with a very stable HID projector lens mount and LED fog lights mount. The end results is like it was made for the car.
Like anything else, it comes down to budget, time (yours or theirs) and what you value.
I hear ya' brother!
I'm eyeballing a new F150 STX Ecoboost 10 speed and have already started looking at ALL the aftermarket stuff available for it!
I feel like a kid in a candystore!
Even the Fusion Sport has a bunch of aftermarket parts available.
Sorry to the OP for the thread Hijack!....
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
There are currently 1 users browsing this thread. (0 members and 1 guests)