WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Bezel
Not sure what shifter Zack ended up using in his race car? But he used the same boot as mine with a bezel as well IIRC.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
^^^This will clean it up real nice!
'04 Silver Marauder w/ sunroof - HID lighting, JL Audio / Eclipse DVD/NAV/iPod/camera, 4.10's, 2" drop, Progard Bumper Baffle, Delete tips, Billet Pedals, BC4E dead pedal, Lidio Tune, Mach1 chin spoiler, K&N CAI, TCE lines, Super40's, tinted tails, SS Inserts, Heinous Control Arms, Real oil gauge, lighted door handles. Currently installing Eaton M112.
2004 Mercury Marauder
Born March 2004, adopted October 2005. Sold January 2012, adopted AGAIN January 2016
2,187 of 3,214
997 in Silver Birch
448 with light flint interior
304 with heated seats
336 with sunroof
The came in handy (old ones). My sister has a beat p71 (has bullet holes and all). Her arms wore out and she came to see me at work the following Monday from me swapping the arms out. Lucky her mine were still usable.
I still need the watts arms.
I did just order the tce brake lines. Still need the calipers and frt rotors to finish out that swap.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
I have a shifter bezel ordered
Got my stereo all wired and installed. Got the factory temp gauge working.
Got all the frt brake components in except tce brake lines (should be today). Got the stuff mocked up and my frt wheels don't even come close to fitting . Guess I'll be stepping the frts up to 20" sooner then I thought.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
2019-02-02_02-05-46 by Cheapthrillb2, on Flickr
Got my tce lines in and finished test install. Just waiting on the new front wheels to come in to test fit before painting the calipers.
Working on relocating the turbo/exhaust etc. Continuing progress to clean up the engine bay... Current state...
2019-02-03_02-02-43 by Cheapthrillb2, on Flickr
Also working on relocating the radiator to under the core support instead of behind it.
I should also have my new metco watts arms Monday from mo's speed shop. That Marty sure is a great guy.
Last edited by cheapthrillb2; 02-03-2019 at 12:58 PM.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Sunday morning coffee update. Seems to be when I do it lol.
Hooked up with Marty on some new metco watts. to Marty.
Got those installed and a new pivot.
20190207_205927 by Cheapthrillb2, on Flickr
20190209_103244 by Cheapthrillb2, on Flickr
20190209_103223 by Cheapthrillb2, on Flickr
Also got the front calipers painted and installed along with tce brake lines front and rear. Question, are the 4 hose brackets at the frame supposed to be the same? Rears didn't come close to fitting. Ended up drilling a hole in each side to fit the bracket in the rear, not a big deal.
20190209_130732 by Cheapthrillb2, on Flickr
20190209_130750 by Cheapthrillb2, on Flickr hose looks funny but clears.
New wheels clear the brakes.
20190207_175934 by Cheapthrillb2, on Flickr
I found this USB port on Amazon that perfectly replaces the socket with no changes to the housing. Just need to adapt the +/- to it.
20190206_213958 by Cheapthrillb2, on Flickr
My exhaust kit came in so I've been reworking that, moving the turbo and routing the downpipe differently.
2019-02-09_02-05-50 by Cheapthrillb2, on Flickr
I gotta get the exhaust done to the trans crossmember along with a handful of other items as I need to pull the 4L80 out to get it freshened up by the end of the month. Local track opens early April weather permitting.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
I remember grinding a little off the bracket to make them fit.
Like you said no big deal.
My dumbass installed the rear lines on the front first and bled them out, then went to the rear and realized I fawked up. The rears on the front fit pretty decent.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
That's funny! Pretty sure your not the first.
Your MM keeps getting better and better
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Thanks fellas, can't wait for the weather to break for the season.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
2019-02-17_08-50-30 by Cheapthrillb2, on Flickr
More work underwood.
20190214_164258 by Cheapthrillb2, on Flickr
20190214_165647 by Cheapthrillb2, on Flickr
My old battery Junction box plastic was all broken up. Grabbed a clean one @ the yard. That was not fun swapping all those pins.
Turbo up and down pipes about done. Considering getting them coated by jet hot. Got the new boost referenced fuel pressure regulator installed as well. Still need to figure out what flex fuel sensor to get so I can run e85. Trans needs to come out next.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
Gots the transmission out and dropped off to my guy. Figured I should freshen up the 200k junkyard unit for the coming year of abuse.
20190224_120304 by Cheapthrillb2, on Flickr
While that was out I replaced the tattered insulation on the firewall.
20190224_120509 by Cheapthrillb2, on Flickr
20190224_125218 by Cheapthrillb2, on Flickr
20190224_125701 by Cheapthrillb2, on Flickr
Also working on removing unnecessary pigtails and wiring under the hood.
20190224_135742 by Cheapthrillb2, on Flickr
I also sent my turbo pipes out to jet hot for ceramic coating.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
There are currently 5 users browsing this thread. (0 members and 5 guests)