just the bird poop - its acidic, will get to the whole car shortly - I hope
just the bird poop - its acidic, will get to the whole car shortly - I hope
Steven
2004 Marauder Black, loaded
Vortec S/C
4.10s
3500 PI Stall
Kook's headers
476.9 rwhp 385 lbs/tq
KVR's, QA1's, M&Z control arms, rear sway bar
Lidio tune
2004 Suburban Dark Charcoal
1970 W-30 442 convertible twilight Blue
Used my ipotato to take this pic of my 03:
vs stock in my 04:
Not a priority, but I really do want to return the OEM green look.
Plus, the delete looks bubba'd. Those bright spots aren't from the camera, the cluster is unevenly lit. And everthing below the cluster, with the execption of the aftermarket boost and oil pressure gauges (in the OEM volt and op positions) is still green.
Looks half done. Though, I'm glad it's half done, because the electrical system "upgrades" have been a nightmare un*****ing on this car.
2003 Marauder, Black (Formerly "Levi's"; Vortech, 597RWHP, 570RWTQ)
2004 Marauder, Black (Stock + 4:10)
2010 Challenger SRT8, 6 Speed (AEM Cold Air Intake, Magnaflow exhaust, and some other stuff)
2005 Ford Excursion Limited Diesel-Post Apocalyptic Bug Out Package
Completed the measurement process and then assembled the short block. tonight we put the head studs in and installed the heads, tomorrow will blueprint and install the oil pump and degree the cams
I have a big list of spring projects coming up with new parts I bought over the winter and some years ago....
Wiper cowl
Rocker panel covers
Carpeting and sound insulation
Trunk/license decklid
SS brake lines
Kevlar brake pads
Ignition cylinder
Clips for center console gauges
Adjustable pedal gear
2 used like new rear tires, ditching the 15 year old spare
Win!
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
I took all the carpeting out of the trunk a couple years ago and sprayed it with undercoating to seal it and try to deaden sound. I wonder if the dynamat (Noico in my case) will stick to it?
Finally got around to posting about my project. Rebuilt Eaton sitting on the lower intake for now. Jerrys brackets and COT came in the other day and was very impressed by the quality.
Jerry, YOU DA MAN!
Also installed the 4379 Autometer A/F gauge along with the boost gauge so that I don't have to deal with them later when I finally throw the project together.
Other than that, smooth sailing so far. Probably should make a new thread at some point with the progress I've made from start till finish.
Rewired the a/f and boost gauges
Sent from my SM-G930P using Tapatalk
Build# 1979/3214
Year 2004
300B
Ext. DTR
Int. Dark Char
FINALLY BOOSTED!!!
Cooling system flush, new belt, idler, tensioner, thermostat, heater hoses, upper and lower radiator hoses and oil & filter change for the wife's '07 Charger R/T @ 70k miles.
Last edited by fastblackmerc; 03-27-2017 at 05:10 PM.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Foglights installed on the '98 Danger Ranger.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Got the valve covers back from the powder coating and got the headers back from being ceramic coated
They look good
Thank you, all four pieces cost $457. The headers were discounted but the custom color cam covers were extra
Chiller came in, working on plumbing it.
There are currently 7 users browsing this thread. (0 members and 7 guests)