Page 1 of 12 1234567811 ... LastLast
Results 1 to 15 of 177

Thread: Turbo Build!!! am I missing anything

  1. #1
    Join Date
    Feb 2016
    Location
    sunrise/FL
    Posts
    198

    Turbo Build!!! am I missing anything

    Hey guys just trying to figure out if i'm missing any thing before i start this install.

    Engine:
    03/04 cobra block
    manley forged pistons
    8.7cr
    96 cobra cams
    stage 2 valve springs
    billet gear oil pump

    Fuel:
    aeromotive 340
    boost a pump
    upgraded fpdm
    60lb injectors
    wire upgrade all the way to pump

    Maf:
    pro m

    turbo:
    borg warner s369 sxe

    Tune:
    Marty OOOOOOOOO

    I'm shooting for 10psi 500rwhp at the moment.
    Last edited by Turbo4v06; 02-14-2017 at 09:20 AM.

  2. #2
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    It's going to take a while. You will figure out what's missing along the way. Not exactly a science to turbo Marauders

  3. #3
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    You should shop at VS racing. Good stuff cheap there

  4. #4
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    What is your planned pipe routing?

  5. #5
    Join Date
    Feb 2016
    Location
    sunrise/FL
    Posts
    198
    Quote Originally Posted by Zack View Post
    What is your planned pipe routing?
    Similar to yours but the ex feed and downpipe will be going under the crossmember.

    Sent from my LG-LS997 using Tapatalk

  6. #6
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Quote Originally Posted by Turbo4v06 View Post
    Similar to yours but the ex feed and downpipe will be going under the crossmember.

    Sent from my LG-LS997 using Tapatalk
    Are you modifying the crossmember?

  7. #7
    Join Date
    Feb 2016
    Location
    sunrise/FL
    Posts
    198
    Yes slight notching

    Sent from my LG-LS997 using Tapatalk

  8. #8
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Quote Originally Posted by Turbo4v06 View Post
    Similar to yours but the ex feed and downpipe will be going under the crossmember.

    Sent from my LG-LS997 using Tapatalk
    Are you modifying the crossmember?

  9. #9
    Join Date
    Feb 2003
    Location
    Maryland
    Age
    40
    Posts
    1,427
    This helped with clearance greatly, just make sure you add some bracing under the cutouts
    Last edited by Seneca; 05-11-2017 at 05:52 AM.
    04 twin turbo Marauder custom made by myself 😁
    3800stall freddy Brown 4stbe trans 31 spline rear
    601rwhp 592rwtq @19psi

  10. #10
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    I really need to do that ^^^^ for my next project

  11. #11
    Join Date
    Feb 2003
    Location
    Maryland
    Age
    40
    Posts
    1,427
    Quote Originally Posted by Zack View Post
    I really need to do that ^^^^ for my next project
    You need to come help me finish mine!!! Motivation!!!!
    04 twin turbo Marauder custom made by myself 😁
    3800stall freddy Brown 4stbe trans 31 spline rear
    601rwhp 592rwtq @19psi

  12. #12
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    Quote Originally Posted by Seneca View Post
    You need to come help me finish mine!!! Motivation!!!!
    Quit being lazy

  13. #13
    Join Date
    Feb 2016
    Location
    sunrise/FL
    Posts
    198
    Quote Originally Posted by Seneca View Post
    This helped with clearance greatly, just make sure you add some bracing under the cutouts
    are your pipes hugging the crossmember

  14. #14
    Join Date
    Feb 2003
    Location
    Maryland
    Age
    40
    Posts
    1,427
    Quote Originally Posted by Turbo4v06 View Post
    are your pipes hugging the crossmember
    Everything is back apart at the moment for the 20th time, I'll try to get progress pictures this weekend, they're about .75 for the top, mine are both 3in down pipes, there's gonna be plenty of clearance with 3in pipes
    04 twin turbo Marauder custom made by myself 😁
    3800stall freddy Brown 4stbe trans 31 spline rear
    601rwhp 592rwtq @19psi

  15. #15
    Join Date
    Feb 2016
    Location
    sunrise/FL
    Posts
    198
    Quote Originally Posted by Seneca View Post
    Everything is back apart at the moment for the 20th time, I'll try to get progress pictures this weekend, they're about .75 for the top, mine are both 3in down pipes, there's gonna be plenty of clearance with 3in pipes
    ok, whats the dept of your notches, my pipes will be 3" also

Page 1 of 12 1234567811 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Build number spreadsheet
    By a_d_a_m in forum Community Discussion
    Replies: 577
    Last Post: 02-13-2024, 08:17 AM
  2. One HELLLL of a build!!
    By cer0413 in forum Community Discussion
    Replies: 12
    Last Post: 11-06-2016, 04:45 PM
  3. turbo kit for 03 mm
    By pun in forum Other Parts for Sale
    Replies: 11
    Last Post: 07-18-2007, 08:00 AM
  4. Electronics gurus...how can I build this?
    By Breadfan in forum The Lounge
    Replies: 17
    Last Post: 05-25-2006, 01:09 PM
  5. Turbo Ernie
    By SergntMac in forum Shop Talk
    Replies: 36
    Last Post: 05-10-2005, 12:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •