I wish I were closer and had the time off.Originally Posted by martyo
An East bound traveling man.
I wish I were closer and had the time off.
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
Weißbirke Plünderer
I'm not close, don't have time off to use, my car is going there. it will be transported by a well known carrier in about 4-5 weeks for blower porting etc. and other items i want done.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Procharged Marauder
My vote is rebuild your current engine, what happend to the original engine?
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
An East bound traveling man.
Seneca,
One of two things I was told happened. Spun a bearing or threw a rod. It sounds like a freaking jackhammer. Ran fine before I dropped it off for a simple road force Balance job and went to start...it hesitated started and broke all in one action. I know the folks that had it broke it but cannot prove it.
I have been quoted 5k for the pull rebuild install and tune. If I can get a cobra takeout with everything still attached...make sense to get it for a few grand more.
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
Delaware Marauderer
What he said....
Or send and have him rebuild your motor.
2004 MM (Black) #112 of 3213 (SOLD)
2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
3.35 L 4X4
-AND-
SLAYER1
formerly owned by "Impala Slayer!! 2004 SB MM
Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...
An East bound traveling man.
Looking into transport companies now. If it is going to be done...it needs to be done by someone that knows these cars.
Welcome to the DARKSIDE...
2003 Black Mercury Marauder
Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars
Best run: 13.75 @ 99.6 sec on 4 May 07
Junior Member
so has there been any update to this. my motor just blew on the highway I'm waiting to hear back on cost to replace or rebuild
Senior Member
Oh man, what happened? That's terrible
Junior Member
So got the car back the local guy could not even give me a price. so I got it back, here is a quick vid on what it sounds like.
https://youtu.be/K7a8I7TP7wE
don't know what I did wrong, 162K this is (was) my commuter car 66 Miles a day.
Senior Member
"Video unavailable"
Junior Member
hope it works now
https://youtu.be/K7a8I7TP7wE
Senior Member
I'm sorry to hear that, the guys here can probably tell you what it appears to be. Good luck
Righteous Indignation
03 300A
4055 of 7838
4054 of 7093 in Black.
Born 8/23/02
Adopted in 1/15
SOLD
There's a little kid in all of us...
I bought a used engine and had it replaced at the same shop. Really nice guy in PA.
Junior Member
I have 2003 mm with lower end knock i need new motor can you find me on also pm me price for motor plus labor please
Sent from my SM-N910P using Tapatalk
T242 - Ricer ricer
https://www.mercurymarauder.net/foru...73&postcount=1
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
