Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: PCV Elbow from justbob

  1. #1
    Join Date
    Mar 2013
    Location
    Maine
    Posts
    237

    PCV Elbow from justbob

    I saw this in an old post:
    https://www.youtube.com/watch?v=E0zn...layer_embedded

    I tried to PM justbob but his inbox is full.

    Can someone supply me with one by Friday or preferably just tell me what parts to buy locally or at mcmaster carr? Looks like thin metal conduit to bend, with my OEM elbow at one end and a size appropriate elbow at the other. Just not sure what pieces to order specifically.

    Thanks!
    2003 MM 300A #4271 [BURNOUTS ACROSS AMERICA car / RIP Paul Casey]
    fully built teksid motor done 3/1/16, too many mods to list...

    Visit my garage for details

  2. #2
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    LMAO!!!! It's a piece of electrical conduit

  3. #3
    Join Date
    Mar 2013
    Location
    Maine
    Posts
    237
    For once Zack, can you not provide such a rash response?
    2003 MM 300A #4271 [BURNOUTS ACROSS AMERICA car / RIP Paul Casey]
    fully built teksid motor done 3/1/16, too many mods to list...

    Visit my garage for details

  4. #4
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Just electrical conduit.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  5. #5
    Join Date
    Nov 2008
    Location
    North of the Border
    Age
    46
    Posts
    3,195
    Quote Originally Posted by F1erceK View Post
    For once Zack, can you not provide such a rash response?

    Please refrain from these types of microagressions.
    Don't bring skittles to a gunfight.

  6. #6
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    8,001
    are we even sure it is justbob referenced? video just says bob
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  7. #7
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    justbob made that for Bazzlebear way back when.

  8. #8
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Just 1/2" EMT conduit with about four bends. I'll look up in the garage attic to see if I have more. Doubtful though because I only made up about 10 or so.


    Sent from my iPhone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  9. #9
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Looks like there all gone.


    Sent from my iPhone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  10. #10
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    If I can get a template I'll make some.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  11. #11
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    90* left radius
    15* right rolling offset
    15* back of 90
    bend
    30* rolling right radius to PCV
    Trim ends

    There's the ingredients!




    Sent from my iPhone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  12. #12
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    Use schedule 40 conduit for a challenge ��
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  13. #13
    Join Date
    Sep 2013
    Location
    Aurora, Illinois
    Age
    50
    Posts
    882
    Quote Originally Posted by justbob View Post
    90* left radius
    15* right rolling offset
    15* back of 90
    bend
    30* rolling right radius to PCV
    Trim ends

    There's the ingredients!




    Sent from my iPhone using Tapatalk
    You forgot a pinch of Love.
    Buying things I don't need, with money I don't have, to impress people I don't know!!!
    Production #1489 of 3213/#516 of 997

  14. #14
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,739
    Quote Originally Posted by champ1173 View Post
    You forgot a pinch of Love.
    And a Bourbon!


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  15. #15
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353

    PCV Elbow from justbob

    ...........
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Centri pcv mods
    By cer0413 in forum Power Adders
    Replies: 15
    Last Post: 12-08-2016, 08:05 AM
  2. PCV Valve Replacement??
    By Marauderjack in forum Shop Talk
    Replies: 20
    Last Post: 10-28-2006, 08:31 AM
  3. Replies: 7
    Last Post: 08-29-2006, 07:53 PM
  4. S&B Breather Filter, or PCV Hose to RAI?
    By Svashtar in forum JLT Performance
    Replies: 6
    Last Post: 01-17-2005, 05:51 AM
  5. Crankcase Breathers
    By Brutus in forum Shop Talk
    Replies: 31
    Last Post: 10-06-2004, 05:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •