I know this is stupid, but how do you change the license plate light bulb? I've looked from the inside, and I can't get my hand in that area. It's cold out, and I don't want to stand out trying to figure it out. Thanx
I know this is stupid, but how do you change the license plate light bulb? I've looked from the inside, and I can't get my hand in that area. It's cold out, and I don't want to stand out trying to figure it out. Thanx
There are 2 metric screws above the license plate that you need to remove to access the bulb. Have fun.
(#6178 in black per FPIC)
Call 1-800-FORD-788 and press "1". Have the last 6 of your VIN handy. You will get the numbers for FREE. You'll pay $$$ for the certificate.
MM traded in 8/9/13 @ 128909 miles. It was fun for almost 8 years. I met airmercpun on 1/17/14. He was the new owner of my former ride. -Now gone.
Update: back in the game with a late build 03 GMGS with some MM add ons like Escape audiophile radio w/Sirius sat radio, rear sway bar, catback exhaust, and header panel.
Rest In Peace:
Alex "Marauderboi" Vachon 3/2/92-8/13/10
Paula Babineau 1/9/67-8/2/11
Rex Weinbender
Peter
See my garage file for part numbers and whatnot.
IMHO, this site- the members that I chat with- and the ones that I now Hang with- are like my 2nd family. There is such an ongoing welcome feeling here that even members who don't or no longer own the MM can feel.
Above the license plate there is a small bracket that holds the lens, it is held in place with two pins, with a slot in the side. they twist by hand but don't un-screw, am I in the wrong place?
Maybe yours was changed before? I hope that you can get this job done without removing the whole assembly.
(#6178 in black per FPIC)
Call 1-800-FORD-788 and press "1". Have the last 6 of your VIN handy. You will get the numbers for FREE. You'll pay $$$ for the certificate.
MM traded in 8/9/13 @ 128909 miles. It was fun for almost 8 years. I met airmercpun on 1/17/14. He was the new owner of my former ride. -Now gone.
Update: back in the game with a late build 03 GMGS with some MM add ons like Escape audiophile radio w/Sirius sat radio, rear sway bar, catback exhaust, and header panel.
Rest In Peace:
Alex "Marauderboi" Vachon 3/2/92-8/13/10
Paula Babineau 1/9/67-8/2/11
Rex Weinbender
Peter
See my garage file for part numbers and whatnot.
IMHO, this site- the members that I chat with- and the ones that I now Hang with- are like my 2nd family. There is such an ongoing welcome feeling here that even members who don't or no longer own the MM can feel.
I think so, It was these 2 little screws on either side of the light. Once you pull them out the light will drop out.
2003 MERCURY MARAUDER 300A
Build Date
5/31/02
Sequence#
#363 of 7839 Black Marauders
Dyno tested power
450 RWHP & 405 RWTQ on 93 octane
Best 1/4 mile time to date
12.456@109mph
Visit my Garage
Blackened300a's Garage
I pulled the two little pins down, and the assembly came down, I unscrewed the bulb holder, and that was it. Thanks for all the help.
Glad you got help! The title of this thread had me guessing as to what it was about.
2004 Black Mercury Marauder
Trilogy Eaton Intercooled Supercharger #200
483 RWHP 471 RWTQ @ 13.5 lbs of Boost 2.8" Pulley
11.76 @ 116.25 1.65 60ft
17,500 Miles
There are currently 1 users browsing this thread. (0 members and 1 guests)