Senior Member
Hey guys, I need a small favor. I need a measurement from a Trilogy-supercharged Marauder - from the front of the engine (face of the front timing cover) to the back of the supercharger case itself (right at the seam of the blower case->inlet adapter duct/elbow)
It doesn't have to be exact or anything, just close. I'd really appreciate it!
Thanks,
-Derek
Last edited by Drock96Marquis; 07-13-2008 at 12:38 PM.
-My Homepage and Panther tech-
My Mint 96' Mercury Grand Marquis Supercharged LSE-
Modifications
Click My Merc for more Pics!
Atlanta Trilogy #1
Meaurement
The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.
Glenn
Trilogy #124
11.80 @ 117.16 MPH: SSHS9
1.74 sec - 60'
443 RWHP/437 RWTQ
"Stock Internal Engine" - Click Below
Turbo Marauder
Thanks!Originally Posted by Glenn
The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.
Glenn
Now go measure what he asked you to measure
Senior Member
The measurement is from the rear of the water pump (electric) housing which is the front timing cover plate to the seam of the inlet on the blower case = 15 inches.
Glenn
That should work, thank you Glenn!
-My Homepage and Panther tech-
My Mint 96' Mercury Grand Marquis Supercharged LSE
Modifications
Click My Merc for more Pics!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote