Results 1 to 15 of 15

Thread: Mach 1 chin spoiler for marauder

  1. #1
    Join Date
    Aug 2018
    Location
    Farmersville, ca
    Age
    36
    Posts
    5

    Mach 1 chin spoiler for marauder

    Hello, first time poster here, I purchased my marauder about a month ago. I'm looking into purchasing a Mach 1 chin lip for it. Do you guy have any recommendations?
    I see some that claim to be a bit longer to be flush with the mustang fender well. Is this a good route for the marauder or am I better off with the normal(short) version? Any brand or website recommendations? so far I'm looking at American muscle and LMR. Thanks for any advice.

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by Unknown View Post
    Hello, first time poster here, I purchased my marauder about a month ago. I'm looking into purchasing a Mach 1 chin lip for it. Do you guy have any recommendations?
    I see some that claim to be a bit longer to be flush with the mustang fender well. Is this a good route for the marauder or am I better off with the normal(short) version? Any brand or website recommendations? so far I'm looking at American muscle and LMR. Thanks for any advice.
    Ebay for any place that sells Mustangs parts will have them.

    This is the one most of us use:
    https://www.ebay.com/itm/For-99-04-M...4AAOSw~ehalHN2

    I mount mine and the few I've installed with 1/4" plastic push rivets.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    I buy all mine from American muscle, it's the matte finish like oem plastics

    Others might be glossy and just don't look correct
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  4. #4
    Join Date
    Aug 2018
    Location
    Farmersville, ca
    Age
    36
    Posts
    5
    Thank you both for the response.
    Would either of you say that the addition length that LMR claims to have is unnecessary for the marauder application?

    Here is a video on it
    https://youtu.be/yGj2cPeM0no

  5. #5
    Join Date
    Aug 2011
    Location
    Washington State
    Posts
    2,108
    Quote Originally Posted by Unknown View Post
    Hello, first time poster here, I purchased my marauder about a month ago. I'm looking into purchasing a Mach 1 chin lip for it. Do you guy have any recommendations?
    I see some that claim to be a bit longer to be flush with the mustang fender well. Is this a good route for the marauder or am I better off with the normal(short) version? Any brand or website recommendations? so far I'm looking at American muscle and LMR. Thanks for any advice.
    This is a Genuine Ford (3R3Z-17626-AAA) on my car.
    Attached Images Attached Images

  6. #6
    Join Date
    Aug 2018
    Location
    Farmersville, ca
    Age
    36
    Posts
    5
    Quote Originally Posted by NXSBOB View Post
    This is a Genuine Ford (3R3Z-17626-AAA) on my car.
    That looks really good! I think I would like the factory/shorter version so I can tuck the lip farther back under the bumper.

    Anyone have any idea of American muscles version is the same size as the Ford OEM version?

  7. #7
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Here's mine, ordered it from American Muscle.




    Sent from my iPhone using Tapatalk


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  8. #8
    Join Date
    Aug 2018
    Location
    Farmersville, ca
    Age
    36
    Posts
    5
    [QUOTE=NATEHAWK;1564931]Here's mine, ordered it from American Muscle.




    That looks really good I think Im going with American muscle! Thanks and Thanks to everyone for the help!

  9. #9
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,207
    IIRC it comes bent in half. Put it in the Sun for a while and it'll straighten out.

  10. #10
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Quote Originally Posted by Mr. Man View Post
    IIRC it comes bent in half. Put it in the Sun for a while and it'll straighten out.


    What he said


    Sent from my iPhone using Tapatalk


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  11. #11
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,511
    Quote Originally Posted by Unknown View Post
    Thank you both for the response.
    Would either of you say that the addition length that LMR claims to have is unnecessary for the marauder application?

    Here is a video on it
    https://youtu.be/yGj2cPeM0no
    I think that the longer version is a longer lip so the Mach 1 looks like it has a beefier lip?

    I've never purchased one, I don't think the marauder needs a huge lip under it.

    Start in the middle and get the ends flush on each side

    I put a bolt in the middle and cheat by using some of the existing bolt washers to hold the edge of the chin spoiler up, then use some of the existing holes and tighten it down
    For the ends I use a 1/4 inch self tapping screw
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread

  12. #12
    Join Date
    Jan 2017
    Location
    Springfield Mo
    Age
    44
    Posts
    198
    I cut mine in half, scooted them to the edges of the bumper, then angle cut the inside part with about a foot of gap in the center . Looks way better than one piece it's been for 2 years imo

  13. #13
    Join Date
    Aug 2018
    Location
    Somersworth New Hampshire
    Posts
    105
    Quote Originally Posted by fastblackmerc View Post
    Ebay for any place that sells Mustangs parts will have them.

    This is the one most of us use:
    https://www.ebay.com/itm/For-99-04-M...4AAOSw~ehalHN2

    I mount mine and the few I've installed with 1/4" plastic push rivets.
    Hey fastblackmerc...did you find the look to be as good as the factory one? Any pics of yours?
    03 black 300A # 2827 stock setup 275,000 on car. 65,000 on engine from a 04. 03 engine died at 273,000 . Rear cat delete with magnaflow 11256 mufflers.

  14. #14
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,737
    Quote Originally Posted by Mackdombles View Post
    I cut mine in half, scooted them to the edges of the bumper, then angle cut the inside part with about a foot of gap in the center . Looks way better than one piece it's been for 2 years imo
    Pictures or it didn't happen. Is this the Dave Letterman/Michael Strahan effect?


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  15. #15
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by Maverick pro View Post
    Hey fastblackmerc...did you find the look to be as good as the factory one? Any pics of yours?
    It looks good. There is no "factory" one for the Marauder.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. mach 1 chin spoiler
    By cer0413 in forum Shop Talk
    Replies: 36
    Last Post: 01-05-2014, 08:38 AM
  2. Mach 1 chin spoiler !!!!!
    By Mw 2309 in forum Shop Talk
    Replies: 1
    Last Post: 09-27-2012, 09:16 AM
  3. Wanted To Buy Mach 1 Chin Spoiler/rear spoiler
    By BCMARAUDING in forum Marauder Parts/Misc. Wanted
    Replies: 9
    Last Post: 08-02-2011, 07:01 AM
  4. Mach 1 chin spoiler
    By 03blackmerc in forum Shop Talk
    Replies: 15
    Last Post: 09-21-2009, 08:28 PM
  5. WTB: Mach 1 Chin Spoiler
    By paulderlunas in forum Other Parts for Sale
    Replies: 11
    Last Post: 05-22-2008, 04:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •