Having Stainless Works exhaust and doing an Eaton Swap with a 2lb. lower and 3.00 upper (metco), where do you think I would end up as far as hp/tq?
Having Stainless Works exhaust and doing an Eaton Swap with a 2lb. lower and 3.00 upper (metco), where do you think I would end up as far as hp/tq?
2004 Black Marauder: #2237 Born on 4/1/2004
Eaton Swapped and a bunch of other goodies!
You may want to reconsider that upper pulley size with a two lb lower, that's going to give you some pretty big boost (like 15+).
I'd recommend staying with a stock lower, or if you go with a 2 lb lower, using maybe a stock (3.6") or 3.4" upper.
I'm running a stock upper and 2 lb lower and that's good for just under 11 lbs boost, 430 hp/428tq.
2003 300B DBP
Build date: 6/19/03
Number 7,792 of 7,838 - 326 of 328
Proud member of the MM "BLUES" Bros.
Purchased: 11/10/05
Eaton swap by ImpalaSlayer 11-09-10
Semper et in Aeternum, Mercurius.
In Memory:
2004 DTR
Build Date 01/27/04
Purchased 04/04/04
Wrecked 10/19/05, R.I.P.
Bout ready to put that eaton on? I'm trying to get some parts together as well.
eaton swapped baby!!!
"No, mommy and daddy didn't buy it for me"
Lifespeed
2004 Silver Birch Marauder 130K miles
Wilwood Aero6 F, NMDP R brakes, Penske 7500DA shocks, Hypercoil 600lbs F and Grand Marquis R air springs, Addco tubular sway bars, Metco control & Watts, 31 sp axles, Stainless Works cat-back exhaust, Lidio tune, American Racing AR883 9.3" 50mm F 10" 59mm R 20" wheels, Pirelli P-Zero 265/35-20, 275/40-20 tires
Coming soon: Livernois 5.0L stroker, ADTR/Vortech V2 intercooled SC, Silverfox trans and Circle D converter
Keep your fingers crossed its under 450.
Matt H.
(sold)2004' SB, 268rwhp/295tq
1990 Mustang GT, Dart 363, Si-trim, T56, Holley Terminator X. 622rwhp/527tq
2003 SVT Cobra, Posi Port 497rwhp/481tq. SCT Pro Racer Pack.
2017 F-150, 5.0
2013 SHO DIB Performance Pack
Thanks Rex!I'd recommend staying with a stock lower, or if you go with a 2 lb lower, using maybe a stock (3.6") or 3.4" upper.
Still researching and collecting the last few parts. It will be late fall or winter this year when I start. Want to take the car to the strip and run it n/a to see what it does. Your gathering the parts too! How far are you in your hunt?Bout ready to put that eaton on? I'm trying to get some parts together as well.
2004 Black Marauder: #2237 Born on 4/1/2004
Eaton Swapped and a bunch of other goodies!
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
Zack was around 490 for a couple years on a stock block till he upgraded.
I've been at 466 for almost two years with no issues. I am bored with that and upgraded myself to play it safe.
Most here know how him and I drive our cars.
H.P. has very little to do with remodeling a block compared to AFR, timing, and boost pressure. Not too mention centri's can push them safely into the very high 400's.
Sent from my iPhone 4s using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Yea that would be a great comparison, and fun too. I would be interested in running to a drag strip with ya. I'm not very far at alli wish I could just drop the car off and have someone else do it. I hardly have the time.
eaton swapped baby!!!
"No, mommy and daddy didn't buy it for me"
2003 MM 300A
#738 of 7,838 BLK
Build date: 6/6/2002
Adopted: 2/05/2013
MODS:
Metco control arms, Addco sway bars, TCE brake lines, Gatorback belt, remote start, underbody lights, custom doorsills. Black with custom silver hood stripes (S-55 theme)
2004 CV LX SPORT
ALL BLACK, 6 DISC, TUNED MZT
Adopted on12/09/18 from chief455
COMING SOON-Trilogy #005 THANKS CWright-
I am afraid you have awakened a sleeping Giant
http://www.mercurymarauder.net/forum...=view&id=14156
BIG BIG thanks to the GOD of marauder parts ( Darren) I am the 1st winner of Darren bag of fun give-away
2003 300B DBP
Build date: 6/19/03
Number 7,792 of 7,838 - 326 of 328
Proud member of the MM "BLUES" Bros.
Purchased: 11/10/05
Eaton swap by ImpalaSlayer 11-09-10
Semper et in Aeternum, Mercurius.
In Memory:
2004 DTR
Build Date 01/27/04
Purchased 04/04/04
Wrecked 10/19/05, R.I.P.
There are currently 1 users browsing this thread. (0 members and 1 guests)