Hello all. I'm rebuilding my motor and I've already come across a problem. I do not know where the four long main studs go. Can someone tell me where or show me a diagram or link or point me in the right direction? Any help is very much appreciated.
Hello all. I'm rebuilding my motor and I've already come across a problem. I do not know where the four long main studs go. Can someone tell me where or show me a diagram or link or point me in the right direction? Any help is very much appreciated.
2004 DTR Marauder - Mods in the works.
Born-05 January 2004
#1253 of a build of 3214
#400 of 980 manufactured in Dark Toreador Red
I highly recommend a decent book. Or due lots of research.. you'll be happy you did.. to answer your question the main studs go in the bottom of the block for the main caps for the crank bearings
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
Studs should go in caps 3 and 4 for the windage tray to mount to.
1996 Impala SS - 12.67 at 108 mph
367 rwhp/ 368 rwtq
2003 300a Twin Screwed - 12.3 at 110 mph
396 rwhp/ 414 rwtq with box tune
458 rwhp/ 463 rwtq with Lidio tune, Stainless headers, JLT, and 60lb injectors. Tuned on 91 octane. - 11.775 at 118 mph.
Now - 600 rwhp/ 552 rwtq, on E85. Tuned by Jeff at MO's. Waiting for the drags to reopen next spring to hopefully dip into the 10's.
There are currently 1 users browsing this thread. (0 members and 1 guests)