Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: 2004 Marauder Engine rebuilt, with heads

  1. #1
    Join Date
    May 2004
    Location
    Elgin, Illinois
    Age
    68
    Posts
    181

    2004 Marauder Engine rebuilt, with heads

    Well....this is the original motor from my '04. When it blew at 112,000 (with a Trilogy), I had it replaced with a Ford Racing Aluminator. Then proceeded with having the original motor rebuilt. The motor was bored .20 over and how has .50mm Federal-Mogul Hypereutectic pistons and rings and the crank-shaft was micro-polished. The entire motor was disassembled, rebuilt and re-assembled. There was no damage to the heads originally, just burned a couple cylinders.

    Right now it's back together and sitting on a pallet waiting for a Marauder or Mustang to be transplanted to.

    For more information and a copy of the complete parts list of what was put into this thing, you can PM me (I don't really check in all that often) or email at bill@elginet.com
    Last edited by FudPucker; 05-29-2015 at 01:26 PM.
    ______________________________ ______________
    Bill O'Neill - ElginetMedia
    ______________________________ ______________
    VIN 2MHHM79V84X656986
    Born on Feb. 9, 2004
    #1679 of 3214 Built and #562 of 980 DTRs
    Ford Racing 4.6 Aluminator / Supercharger by Trilogy #34!!!

  2. #2
    Join Date
    May 2004
    Location
    Elgin, Illinois
    Age
    68
    Posts
    181
    *************** PLEASE NOTE *********************

    THERE IS NO INTAKE MANIFOLD WITH THIS MOTOR!
    ______________________________ ______________
    Bill O'Neill - ElginetMedia
    ______________________________ ______________
    VIN 2MHHM79V84X656986
    Born on Feb. 9, 2004
    #1679 of 3214 Built and #562 of 980 DTRs
    Ford Racing 4.6 Aluminator / Supercharger by Trilogy #34!!!

  3. #3
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    Photos, please.

  4. #4
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    And price??
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!





  5. #5
    Join Date
    Aug 2008
    Location
    SW MI
    Age
    43
    Posts
    800
    Email sent.


    If a million people believe a foolish thing, it is still a foolish thing.
    ~ Anatole France

    2004 DTR 54k, Dark Charcoal, heated seats, moonroof, trunk organizer.
    Mods: K and N intake, Lido tune, Pro Guard rear bumper, stainless bumper inserts, res delete tips, misc
    UncleLar's first DTR

    2004 Ford Crown Victoria Sport 100k, black, Dark Charcoal, stock and a zero option car.

  6. #6
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Ill start $8.00
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  7. #7
    Join Date
    Feb 2015
    Location
    South Florida
    Posts
    1,117
    Quote Originally Posted by lji372 View Post
    Ill start $8.00
    I'll go $ 8.50

    Righteous Indignation
    03 300A
    4055 of 7838
    4054 of 7093 in Black.
    Born 8/23/02
    Adopted in 1/15
    SOLD

  8. #8
    Join Date
    Feb 2012
    Location
    harrison twp,mi
    Posts
    8,700
    Quote Originally Posted by Gerry24 View Post
    I'll go $ 8.50
    I'm out
    Those were the days.........

    DANG THEY'RE CUTE!!!!!!
    Smile and Nod
    I love THIS bar

  9. #9
    Join Date
    Nov 2010
    Location
    Lincoln, NE
    Posts
    408
    I'll do $10.01


    Sent from my iPhone using Tapatalk
    2003 MM 300A
    #734 of 7,093 BLK
    Build date: 6/6/2002
    Adopted: 10/27/2014

    K&N CIA, J-Mod, 4.10s 31 spline, Lowered
    Mo's tune & Stainless Works Headers Flomaster 40's


  10. #10
    Join Date
    Feb 2003
    Location
    Earth
    Posts
    8,598
    Blog Entries
    2
    I will undercut you $7.49 all cash money, thats US Currency.
    1/4 Mile Time 11.542 @ 121.19 MPH
    195,000 Miles & 275+ Runs Down the 1,320’
    541.57 RWHP & 476.64 RWTQ on DynoJet
    Tuned by Aric at Injected Engineering
    Vortech Super Charger V-2 “T” Trim, 19 PSI
    8 Rib Belt, Innovators West 10% Overdrive Dampner
    Air to Air Intercooler, Mini-race Bypass
    Ford Cobra Remanufactured Long Block
    Snow Performance Water-Methanol Injection
    Kooks Headers & X Pipe
    GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
    Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
    Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
    31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
    Dynotech MMC Driveshaft
    A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
    3,500 RPM Stall Precision Industries Torque Converter
    B&M Deep Finned Trans Pan
    AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
    Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
    AutoPage Alarm RS-727LCD, Boston Acoustic NX87

  11. #11
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    Too rich for me.

  12. #12
    Join Date
    Aug 2008
    Location
    SW MI
    Age
    43
    Posts
    800
    Quote Originally Posted by sailsmen View Post
    I will undercut you $7.49 all cash money, thats US Currency.
    I've got about 22.00 in Canadian coins, beat that.


    If a million people believe a foolish thing, it is still a foolish thing.
    ~ Anatole France

    2004 DTR 54k, Dark Charcoal, heated seats, moonroof, trunk organizer.
    Mods: K and N intake, Lido tune, Pro Guard rear bumper, stainless bumper inserts, res delete tips, misc
    UncleLar's first DTR

    2004 Ford Crown Victoria Sport 100k, black, Dark Charcoal, stock and a zero option car.

  13. #13
    Join Date
    Nov 2007
    Location
    The DMV
    Age
    43
    Posts
    3,194
    No intake manifold?!?!?

    PEASANTS!!!



    "Murcy"
    135 of 11,052


  14. #14
    Join Date
    Aug 2014
    Location
    West Boylston, ma
    Posts
    315
    I should buy this to go with the intake manifold I just removed. I don't know how much it is though.

  15. #15
    Join Date
    Feb 2014
    Location
    Boca raton fl
    Age
    38
    Posts
    149
    Ill go 200

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My Rebuilt Engine.......
    By Marauderjack in forum Community Discussion
    Replies: 28
    Last Post: 05-11-2015, 05:14 AM
  2. For Sale 2004 rebuilt REAR END
    By Blk04MM in forum Marauder-specific Parts for Sale
    Replies: 5
    Last Post: 08-27-2014, 01:09 PM
  3. Wanted To Buy A Marauder 2004 engine needed.
    By gankgoola in forum Marauder Parts/Misc. Wanted
    Replies: 2
    Last Post: 07-05-2014, 09:29 PM
  4. new well rebuilt engine
    By jfclancy in forum North Texas Marauders
    Replies: 6
    Last Post: 04-22-2014, 02:20 AM
  5. Engine Issues/Concerns/questions on Rebuilt
    By frankdc in forum Shop Talk
    Replies: 1
    Last Post: 01-27-2014, 05:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •