MercuryMarauder.net Forums    

Go Back   MercuryMarauder.net Forums > Marauder Community > Community Discussion

Community Discussion Home of the 2003-2004 Marauder.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-06-2019, 12:38 PM
Jakeberg Jakeberg is offline
Junior Member
 

Join Date: Sep 2015
Location: Jensen beach fl
Age: 25
Posts: 14
Trader: (0)
OEM spoiler mounting questions

Due to rust underneath edges of my trunk lid and a dent, I purchased a very clean trunk lid with a factory spoiler mounted to it. Upon inspecting more, I realize now that the spoiler was put on straight but not with the 4 screw template. There is 1 screw each side in the wrong spots about 6 inches from each end(not close enough to corners of trunk), where there were existing through holes from inside the trunk to easily send screws through... seems like it was put on the easy quick way. Even with just two screws it was held on VERY FIRMLY. But I would like to mount correctly. One corner of the tape was dried out and the corner of spoiler was barely loose, but it made me start looking much harder at how it was installed.

Any advice, knowledge, correct hardware size, hole locations/template info, would be greatly appreciated. My car is in great shape but is almost due for fresh paint or clearcoat.. im trying to get the little things done first before any sanding or prep begins. I'm hoping I'm not going to end up disappointed with the purchase I just made. It is beyond me why someone would mount a factory OEM spoiler incorrectly but I'm stuck with what I have now. 😐
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A few spoiler questions sflrainmaker01 Shop Talk 7 07-12-2017 10:07 AM
For Sale Roush Cobra Vic Spoiler with mounting hardware Granite Other Parts for Sale 4 05-12-2015 10:50 AM
Suggestions on mounting Chin Spoiler? MERCULES Community Discussion 9 08-10-2014 03:53 PM
Just bought a new trans cooler - mounting questions babbage Transmissions 26 03-09-2010 02:31 PM
Spoiler & Mod Questions for Logan & The Group JET Community Discussion 3 09-27-2002 10:48 AM


All times are GMT -7. The time now is 06:07 AM.


Powered by: vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2017 - MercuryMarauder.net