MercuryMarauder.net Forums    

Go Back   MercuryMarauder.net Forums > Marketplace > Marauder-specific Parts for Sale

Marauder-specific Parts for Sale This forum is for parts that are specific to the Marauder only.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-10-2018, 02:26 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
Post Console instrument pod and bracket, speedometer cluster, visors

Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48

One speedometer cluster in good condition, showing 160,134 miles. $98.00 Buyer pays actual shipping cost

There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.

One console gauge pod with original Ford gauges. $SOLD

One console gauge pod bracket $SOLD

Pod and bracket together $SOLD

Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $SOLD
Attached Images
File Type: jpg CameraZOOM-20180602165512876.jpg (135.1 KB, 58 views)
File Type: jpg CameraZOOM-20180602165600813.jpg (122.8 KB, 52 views)
File Type: jpg CameraZOOM-20180602174155280.jpg (137.1 KB, 60 views)
File Type: jpg CameraZOOM-20180602223127119.jpg (145.1 KB, 65 views)
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.

Last edited by SteelQualityMan; 08-10-2018 at 06:15 AM. Reason: Price cuts
Reply With Quote
  #2  
Old 06-10-2018, 02:46 PM
Taemian's Avatar
Taemian Taemian is offline
Trilogized by RC_Signals!
 

Join Date: Nov 2006
Location: Langley, BC
Age: 49
Posts: 1,708
Trader: (2)
Hmmm....nevermind. The alternator thread, though? I'd also like the gauge pod with no gauges, is that what you are calling a bracket?
__________________

1 of 170 '04 SB w/sunroof, light flint int.

Lidio's Xcal2 flash, JLT CAI
Trilogized June/08 (mostly installed by RC_Signals)
13.2@103 on stock (balding) tires.

Added: SW Long tube Headers + High Flow Cats
New BFGs (Best Baby Shower gift EVER!)

** New Best**
12.81@107.78 Oct 02/09

Ventilated Block Mod
Out of commission

Rebuilt with:
Teksid block/ForgedInternals/Melling oil pump/Canton windage tray/Rebuilt heads with SVT Cobra cams/Cloyes gears/ SVT Lightning MAF/Accufab TB/ MuscleMerc rear head cooling kit/ Steigy lightly ported and polished Eaton 112
Reply With Quote
  #3  
Old 06-11-2018, 09:29 AM
Spectragod's Avatar
Spectragod Spectragod is offline
Willing to meet up half way
 

Join Date: Feb 2007
Location: OH
Age: 15
Posts: 8,454
Trader: (45)
Quote:
Originally Posted by SteelQualityMan View Post
Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48



One speedometer cluster in good condition, showing 160,134 miles. $250.00



There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.



One console gauge pod with original Ford gauges. $170.00



One console gauge pod bracket $40.00



Pod and bracket together $180.00



Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $55.00


Are those crocs? What size, I may be interested......


Sent from my iPhone using Tapatalk
__________________
I LOVE Jerry's bar, it's my kinda place...........






When you are dead, you donít know you are dead. It is difficult only for others. It is the same way when you are stupid.

"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


Trilogy # 192 / T.S. 0012

BOOST GETS YOU FELONY STOPPED!!!




Reply With Quote
  #4  
Old 06-11-2018, 09:48 AM
NXSBOB's Avatar
NXSBOB NXSBOB is offline
NXSBOB
 

Join Date: Aug 2011
Location: 100 miles from any civilization.
Posts: 1,759
Trader: (18)
[QUOTE=Spectragod;1559594]Are those crocs? What size, I may be interested......
Crocs?
__________________
Reply With Quote
  #5  
Old 06-11-2018, 10:13 AM
Ambitious1's Avatar
Ambitious1 Ambitious1 is offline
Senior Member
 

Join Date: Jul 2014
Location: NY
Posts: 932
Trader: (8)
[QUOTE=NXSBOB;1559596]
Quote:
Originally Posted by Spectragod View Post
Are those crocs? What size, I may be interested......
Crocs?
Crocs are the type of shoes in the last pic.
Reply With Quote
  #6  
Old 06-11-2018, 12:38 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
Quote:
Originally Posted by Spectragod View Post
Are those crocs? What size, I may be interested......


Sent from my iPhone using Tapatalk
Way more than $8.00, sorry. 91/2 medium if you are sending gifts.

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #7  
Old 06-11-2018, 12:43 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
Quote:
Originally Posted by Taemian View Post
Hmmm....nevermind. The alternator thread, though? I'd also like the gauge pod with no gauges, is that what you are calling a bracket?
The pod is the plastic part, the bracket is the metal framework that goes behind/ in front of the console and hold the pod. The gauges come with the pod. I do advise getting a better oil pressure gauge though. ;=]

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #8  
Old 06-11-2018, 01:28 PM
martyo's Avatar
martyo martyo is offline
MO derator
 

Join Date: Jan 2003
Location: Hiram, Georgia
Age: 55
Posts: 17,607
Trader: (26)
Quote:
Originally Posted by SteelQualityMan View Post
Since I will be selling the car shortly, all the spare parts I hoarded must go. All parts are OBO, but please no $8.00 bids. Shipping included UPS ground or USPS to lower 48

One speedometer cluster in good condition, showing 160,134 miles. $250.00

There is a member here who can reset this mileage for you, and replace the lamps with LEDs. Make arrangements with him and I will ship i to him for modification.

One console gauge pod with original Ford gauges. $170.00

One console gauge pod bracket $40.00

Pod and bracket together $180.00

Set of left and right visors with the extra "flap". Lighting connection for mirrors is intact. $55.00
I will take the pod and the bracket.

Let me know how youíd like to be paid.

Thanks.
__________________
Reply With Quote
  #9  
Old 06-11-2018, 01:42 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
PayPal to george.a.baker@gmail.com please.

Preferred shipping address is? Phone number is optional. Parts will go out tomorrow.

Thanks!!
George Baker

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #10  
Old 06-11-2018, 01:44 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
Pod and bracket SOLD.

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #11  
Old 06-11-2018, 03:49 PM
martyo's Avatar
martyo martyo is offline
MO derator
 

Join Date: Jan 2003
Location: Hiram, Georgia
Age: 55
Posts: 17,607
Trader: (26)
Quote:
Originally Posted by SteelQualityMan View Post
Pod and bracket SOLD.

Sent from my SM-N950U using Tapatalk
To m or someone else?
__________________
Reply With Quote
  #12  
Old 06-11-2018, 04:35 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
To. I believe I already received your payment. Parts will ship tomorrow.

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #13  
Old 06-11-2018, 04:39 PM
SteelQualityMan's Avatar
SteelQualityMan SteelQualityMan is offline
60's Street-Strip Racer
 

Join Date: Jun 2009
Location: Warsaw, Indiana
Posts: 233
Trader: (1)
Quote:
Originally Posted by martyo View Post
To m or someone else?
To Martyo

Sent from my SM-N950U using Tapatalk
__________________
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.

Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Reply With Quote
  #14  
Old 06-11-2018, 07:09 PM
Spectragod's Avatar
Spectragod Spectragod is offline
Willing to meet up half way
 

Join Date: Feb 2007
Location: OH
Age: 15
Posts: 8,454
Trader: (45)
Marty pays so fast, he doesnít even realize he bought the parts


Sent from my iPhone using Tapatalk
__________________
I LOVE Jerry's bar, it's my kinda place...........






When you are dead, you donít know you are dead. It is difficult only for others. It is the same way when you are stupid.

"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "


Trilogy # 192 / T.S. 0012

BOOST GETS YOU FELONY STOPPED!!!




Reply With Quote
  #15  
Old 06-11-2018, 07:47 PM
martyo's Avatar
martyo martyo is offline
MO derator
 

Join Date: Jan 2003
Location: Hiram, Georgia
Age: 55
Posts: 17,607
Trader: (26)
Quote:
Originally Posted by Spectragod View Post
Marty pays so fast, he doesnít even realize he bought the parts


Sent from my iPhone using Tapatalk
Thereís worse habits. Lol
__________________
Reply With Quote
Reply

Tags
cluster, pod


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale Instrument Cluster/Speedometer jus2rel Marauder-specific Parts for Sale 9 08-27-2013 05:02 AM
For Sale Sale Instrument Cluster/Speedometer merc Marauder-specific Parts for Sale 0 07-08-2013 03:04 PM
For Sale Mm speedometer cluster NXSBOB Marauder-specific Parts for Sale 2 02-24-2012 07:47 PM
mm instrument cluster k9cinco Other Parts/Misc. Wanted 2 11-11-2008 08:34 PM
Instrument Gauge Cluster and Speedometer blackf0rk Shop Talk 4 01-30-2006 12:28 AM


All times are GMT -7. The time now is 08:50 PM.


Powered by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2017 - MercuryMarauder.net