IS there a way to repair the dot matrix trim?

[fastblackmerc]

I did my P71 in CF and it looks OK but it is really hard to not get wrinkles or folds in the corners. I was a graphics guy for 20 years and know how to do wraps etc and it was really tough to make it look factory. All the films on Amazon are thicker than you expect and a heat gun only helps so much

That's why I'm going with hydro dipping.

[Mr. Man]

Aren't you parting out door panels? Use one of those pieces.

[ByronRACE]

I use these to cover my interior and exterior blemishes. They are easy to apply, and cover the blemish completely.

https://tinyurl.com/blemishfixer

[the fat bastid]

Aren't you parting out door panels? Use one of those pieces.

Yeah, so the full plan was to get the heated seats from the part-out car. I was going to take the door panels but the passenger one has that gouge in it.

[the fat bastid]

That's why I'm going with hydro dipping.

Do you worry about it being straight? I don't know a lot about the process but it seems very..uh..swirly to me.

[Mr. Man]

Yeah, so the full plan was to get the heated seats from the part-out car. I was going to take the door panels but the passenger one has that gouge in it.

So both the parts car and your regular MM have damage on the same piece of trim?.

Trying PMing BigcowlImp, if he's still around, he used to have a treasure trove of wrecked MM parts.

[the fat bastid]

So both the parts car and your regular MM have damage on the same piece of trim?.

My MM passenger door is fine. But those switched can't be swapped easily, can they? I assumed I'd need the whole door? I'd have to cut a hole in my trim piece.

Trying PMing BigcowlImp, if he's still around, he used to have a treasure trove of wrecked MM parts.

Cool. Thanks.

[Zim Hosein]

I use these to cover my interior and exterior blemishes. They are easy to apply, and cover the blemish completely.

https://tinyurl.com/blemishfixer

LOL ByronRACE!

That's why I'm going with hydro dipping.

Are you having this done locally to you or via mail order fastblackmerc? I ask because I'd like to have some pieces hydro dipped, but I am not aware of a reputable place near to me.