I am trying to obtain an accufab throttle body for the Marauder. I can't find it in any of the parts websites, I did one time before. If any one is looking to sell theirs, PM me with an offer.
I am trying to obtain an accufab throttle body for the Marauder. I can't find it in any of the parts websites, I did one time before. If any one is looking to sell theirs, PM me with an offer.
Without Change, There can be no Victory.
Go to the Accufab web site...You'll find it there...
That's were I got mine...I believe it's listed under Mach 1...
ALOHA
'03 A Build Date 8/02
F.I.T. #6 ***RESURRECTED***
*444 RWHP / 401 RWTQ
*10 lbs. Boost
*P1SC1 ProCharger
*SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F
When I turn on my car...It returns the favor
Jim, I know you've said that about a hundred times, but I just can't see why. Have you called accufab? Seems to me they'd stand behind the product or at least offer a reason why and a correction.
Mine was perfect day one (about the same time as you in the GB) and has been installed, TB spacer added, TB spacer removed, upper intake changed, etc, basically on and off the car repatedly over the 50 or so thousand miles I've had it. I cleaned it once and regreased with lithium just cuz I had time and felt like it. I gave away my stocker, I'm so confident with it!
Bro, I just hate to see your hard earned $ collecting dust!
Call Accufab or give me a call. Maybe I can help?
Magindat: (majin-dat) Imagine That.
2013 Ford Taurus SHO
Lemonade - living with Fruit Punch - in Blackmobile's Garage...
FIT Procharger Kit #31 - 3.7 pulley - 9 PSI
World's first BLOW THRU ProCharged Marauder - Reinhart Tuned
#1649
boi
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
My Accufab TB was also sticking when I first installed it...it would hang up 1/3 open when you got off the throttle and the engine would just keep revving.
I carefully & sparingly sprayed all the pivot points and shafts with teflon based lube and it has worked great ever since.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
What your problem may be is the cruise control cable...
My CC cable was about an 1/8th too short, because it's mounting point on the TB was a little more forward than the stock TB...causing the throttle to not close completely...
I just modified the cable bracket ( on the manifold) to move the CC cable a little forward...Problem solved...
Good Luck...
ALOHA
'03 A Build Date 8/02
F.I.T. #6 ***RESURRECTED***
*444 RWHP / 401 RWTQ
*10 lbs. Boost
*P1SC1 ProCharger
*SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F
When I turn on my car...It returns the favor
americanmuscle.com has the TB for a good price!
#1724 of 3214 Built 02/13/2004
2004 Marauder black/moonroof
SCT flip chip, 4:10's, lowered, big brake kit
Kenwood KDC-X790 & 4 Kenwood speakers, 10" Sub
Addco tube sway bars & performance shocks, Metco's
Zex dry nitrous kit, Full SW Exhaust Kit, PI 3000 Stall
5.0L Stroker assembly, Self installed!
E.T. on drag radial tires: 12.270 @ 111.16 & 1.66 60'
One off custom Hood all steel too.
SOON TO BE Vortech supercharged
Ryan Schmuki
2003 Marauder, black with 4.10s n tune (sold)
1968 Fairlane 347 built stroker(fast)
1963 Galaxie 390 auto
2010 Mercury Milan
2019 Taurus Limited
Their price is pretty good.
It's only about $30+ more than my group buy price which is darn good. And they say they have 12 available.
I also sent him a pm and gave him contact info on the place I did the group buys through. Never got a response so dont know if he checked it out.
2003 MARAUDER ---SOLD---
-MOD LIST-
Ø MMR Race 1100 shortblock, Polydyn coated pistons
Ø Pro Turbo Systems turbo kit with Precision 76GTS turbo with polished H compressor housing
Ø Ford GT Complete Cylinder Heads (Cams, Springs, Retainers, etc)
Ø Twin Ford GT fuel pumps, -8 braided stainless lines and billet rails
Ø Custom All Metal Cowl Induction Hood
I talked with the guy who I did the group buy through the first 2 times.
He has 5 of the twin bore throttle bodies for our cars left. He will honor the group buy price we had before. It was $319.
If you are interested, just pm me and I will get you in touch with them.
2003 MARAUDER ---SOLD---
-MOD LIST-
Ø MMR Race 1100 shortblock, Polydyn coated pistons
Ø Pro Turbo Systems turbo kit with Precision 76GTS turbo with polished H compressor housing
Ø Ford GT Complete Cylinder Heads (Cams, Springs, Retainers, etc)
Ø Twin Ford GT fuel pumps, -8 braided stainless lines and billet rails
Ø Custom All Metal Cowl Induction Hood
What's the benefit of the Accufab throttle body? More hp/tq? Better throttle response? Just curious.
Lidio Tune - Ford Racing 4.10 Gears - JLT CAI
Magindat: (majin-dat) Imagine That.
2013 Ford Taurus SHO
Lemonade - living with Fruit Punch - in Blackmobile's Garage...
FIT Procharger Kit #31 - 3.7 pulley - 9 PSI
World's first BLOW THRU ProCharged Marauder - Reinhart Tuned
#1649
boi
There are currently 1 users browsing this thread. (0 members and 1 guests)