![]() |
#1
|
||||
|
||||
Door Keypad Install
Does the door panel have to come off to install a new door keypad? Is it plug and play or do I have to program it?
https://www.ebay.com/itm/201548404749 I don't see clips on the back of the thing. I'm hoping you just remove it from outside the car in 2 seconds. Rooting around youtube did not give me the answers I was looking for...
__________________
|
#2
|
||||
|
||||
It has a harness that plugs into the DDM.
Sent from my iPhone using Tapatalk
__________________
I LOVE Jerry's bar, it's my kinda place........... When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid. "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' " Trilogy # 192 / T.S. 0012 BOOST GETS YOU FELONY STOPPED!!! ![]() ![]() ![]() |
#3
|
|||
|
|||
door panel needs to come off, its plug and play code is in the module not the keypad so you will be fine
__________________
Steven 2004 Marauder Black, loaded Vortec S/C 4.10s 3500 PI Stall Kook's headers 476.9 rwhp 385 lbs/tq KVR's, QA1's, M&Z control arms, rear sway bar Lidio tune 2004 Suburban Dark Charcoal 1970 W-30 442 convertible twilight Blue |
#5
|
||||
|
||||
Its a PITA. I had to remove it when I had my car painted
|
#6
|
|||
|
|||
I have tiny hands, makes it easier to get that pad off. Otherwise long screwdriver, lots of patience and luck
__________________
Steven 2004 Marauder Black, loaded Vortec S/C 4.10s 3500 PI Stall Kook's headers 476.9 rwhp 385 lbs/tq KVR's, QA1's, M&Z control arms, rear sway bar Lidio tune 2004 Suburban Dark Charcoal 1970 W-30 442 convertible twilight Blue |
#7
|
||||
|
||||
It's hard to get around the window to the clips. I suggest removing the window to avoid damage to the glass.
Sent from my iPhone using Tapatalk Pro |
#8
|
||||
|
||||
It's a tight fit, slide the clip towards the mirror and it'll fall out
__________________
|
#9
|
||||
|
||||
Come on....
I can take them off blind folded..... One of the easier jobs.
__________________
“When you can’t make them see the light, make them feel the heat.” Ronald Regan "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists - is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat." Lt. Colonel Ralph Peters “Be polite, be professional, but have a plan to kill everybody you meet.” "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all" General James Mattis ![]() |
#10
|
||||
|
||||
Quote:
Taking off the door panel is easy, I just hate it. Boring. And I'm lazy lately. Why can't it just clip on from the outside like everything else in cars these days?
__________________
|
#11
|
||||
|
||||
When one of those clips break you will be saying otherwise
|
#12
|
||||
|
||||
Quote:
https://www.youtube.com/watch?v=XHOr1pyQJzM
__________________
|
#13
|
||||
|
||||
Hmmm, go to the mall and “experiment?”
Sent from my iPhone using Tapatalk
__________________
I LOVE Jerry's bar, it's my kinda place........... When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid. "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' " Trilogy # 192 / T.S. 0012 BOOST GETS YOU FELONY STOPPED!!! ![]() ![]() ![]() |
#14
|
|||
|
|||
drop it off at a shop with a bar next door . problem solved . does not get much easier with the door open and sitting on a stool , better then pulling the engine and replacing the rod bearings . now that's boring LOL
|
#15
|
||||
|
||||
Just did mine, took the window out and it was super easy. The little Gold circle contacts came off the pad so i fixed them and cleaned everything. Works perfect now.
Sent from my iPhone using Tapatalk Pro |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How would i know my MARAUDER Keypad Door Code pin?????? | bawazir | Shop Talk | 19 | 05-26-2010 01:27 PM |
Door Keypad code? | MercDwarf04 | Community Discussion | 24 | 10-23-2008 08:28 AM |
cvpi door keypad install | mm clone | Shop Talk | 8 | 12-25-2007 06:22 PM |
Door keypad question? | mclemore102 | Community Discussion | 15 | 04-11-2006 07:14 AM |
door keypad | scareme | Community Discussion | 8 | 07-15-2005 09:53 AM |