MercuryMarauder.net Forums    

Go Back   MercuryMarauder.net Forums > The Garage > Power Adders

Power Adders Look here for all your centrifugal, roots, supercharger, turbocharger and nitrous technical discussions regarding the Marauder!

Reply
 
Thread Tools Display Modes
  #1  
Old 02-14-2017, 09:15 AM
Turbo4v06's Avatar
Turbo4v06 Turbo4v06 is offline
Senior Member
 

Join Date: Feb 2016
Location: sunrise/FL
Posts: 197
Trader: (0)
Turbo Build!!! am I missing anything

Hey guys just trying to figure out if i'm missing any thing before i start this install.

Engine:
03/04 cobra block
manley forged pistons
8.7cr
96 cobra cams
stage 2 valve springs
billet gear oil pump

Fuel:
aeromotive 340
boost a pump
upgraded fpdm
60lb injectors
wire upgrade all the way to pump

Maf:
pro m

turbo:
borg warner s369 sxe

Tune:
Marty OOOOOOOOO

I'm shooting for 10psi 500rwhp at the moment.

Last edited by Turbo4v06; 02-14-2017 at 09:20 AM.
Reply With Quote
  #2  
Old 02-14-2017, 11:29 AM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
It's going to take a while. You will figure out what's missing along the way. Not exactly a science to turbo Marauders
Reply With Quote
  #3  
Old 02-14-2017, 11:32 AM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
You should shop at VS racing. Good stuff cheap there
Reply With Quote
  #4  
Old 02-14-2017, 11:39 AM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
What is your planned pipe routing?
Reply With Quote
  #5  
Old 02-14-2017, 12:46 PM
Turbo4v06's Avatar
Turbo4v06 Turbo4v06 is offline
Senior Member
 

Join Date: Feb 2016
Location: sunrise/FL
Posts: 197
Trader: (0)
Quote:
Originally Posted by Zack View Post
What is your planned pipe routing?
Similar to yours but the ex feed and downpipe will be going under the crossmember.

Sent from my LG-LS997 using Tapatalk
__________________
Reply With Quote
  #6  
Old 02-14-2017, 12:55 PM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
Quote:
Originally Posted by Turbo4v06 View Post
Similar to yours but the ex feed and downpipe will be going under the crossmember.

Sent from my LG-LS997 using Tapatalk
Are you modifying the crossmember?
Reply With Quote
  #7  
Old 02-14-2017, 01:02 PM
Turbo4v06's Avatar
Turbo4v06 Turbo4v06 is offline
Senior Member
 

Join Date: Feb 2016
Location: sunrise/FL
Posts: 197
Trader: (0)
Yes slight notching

Sent from my LG-LS997 using Tapatalk
__________________
Reply With Quote
  #8  
Old 02-14-2017, 01:05 PM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
Quote:
Originally Posted by Turbo4v06 View Post
Similar to yours but the ex feed and downpipe will be going under the crossmember.

Sent from my LG-LS997 using Tapatalk
Are you modifying the crossmember?
Reply With Quote
  #9  
Old 02-14-2017, 01:11 PM
Seneca's Avatar
Seneca Seneca is offline
Procharged Marauder
 

Join Date: Feb 2003
Location: Maryland
Age: 34
Posts: 1,334
Trader: (4)
This helped with clearance greatly, just make sure you add some bracing under the cutouts
__________________
04 mercury marauder twin turbo build under way

Last edited by Seneca; 05-11-2017 at 05:52 AM.
Reply With Quote
  #10  
Old 02-14-2017, 01:14 PM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
I really need to do that ^^^^ for my next project
Reply With Quote
  #11  
Old 02-14-2017, 01:16 PM
Seneca's Avatar
Seneca Seneca is offline
Procharged Marauder
 

Join Date: Feb 2003
Location: Maryland
Age: 34
Posts: 1,334
Trader: (4)
Quote:
Originally Posted by Zack View Post
I really need to do that ^^^^ for my next project
You need to come help me finish mine!!! Motivation!!!!
__________________
04 mercury marauder twin turbo build under way
Reply With Quote
  #12  
Old 02-14-2017, 01:18 PM
Zack's Avatar
Zack Zack is offline
Turbo Marauder
 

Join Date: Nov 2002
Location: St. John, IN
Age: 39
Posts: 13,988
Trader: (39)
Quote:
Originally Posted by Seneca View Post
You need to come help me finish mine!!! Motivation!!!!
Quit being lazy
Reply With Quote
  #13  
Old 02-14-2017, 01:43 PM
Turbo4v06's Avatar
Turbo4v06 Turbo4v06 is offline
Senior Member
 

Join Date: Feb 2016
Location: sunrise/FL
Posts: 197
Trader: (0)
Quote:
Originally Posted by Seneca View Post
This helped with clearance greatly, just make sure you add some bracing under the cutouts
are your pipes hugging the crossmember
Reply With Quote
  #14  
Old 02-14-2017, 01:53 PM
Seneca's Avatar
Seneca Seneca is offline
Procharged Marauder
 

Join Date: Feb 2003
Location: Maryland
Age: 34
Posts: 1,334
Trader: (4)
Quote:
Originally Posted by Turbo4v06 View Post
are your pipes hugging the crossmember
Everything is back apart at the moment for the 20th time, I'll try to get progress pictures this weekend, they're about .75 for the top, mine are both 3in down pipes, there's gonna be plenty of clearance with 3in pipes
__________________
04 mercury marauder twin turbo build under way
Reply With Quote
  #15  
Old 02-14-2017, 02:28 PM
Turbo4v06's Avatar
Turbo4v06 Turbo4v06 is offline
Senior Member
 

Join Date: Feb 2016
Location: sunrise/FL
Posts: 197
Trader: (0)
Quote:
Originally Posted by Seneca View Post
Everything is back apart at the moment for the 20th time, I'll try to get progress pictures this weekend, they're about .75 for the top, mine are both 3in down pipes, there's gonna be plenty of clearance with 3in pipes
ok, whats the dept of your notches, my pipes will be 3" also
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Build number spreadsheet a_d_a_m Community Discussion 429 10-10-2017 06:29 PM
One HELLLL of a build!! cer0413 Community Discussion 12 11-06-2016 04:45 PM
turbo kit for 03 mm pun Other Parts for Sale 11 07-18-2007 08:00 AM
Electronics gurus...how can I build this? Breadfan The Lounge 17 05-25-2006 01:09 PM
Turbo Ernie SergntMac Shop Talk 36 05-10-2005 12:23 AM


All times are GMT -7. The time now is 02:14 PM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2017 - MercuryMarauder.net