Has anyone ever used SPC camber bolts to fix camber issues on lowered cars? (there is a video in the link below)
http://spc-tv.com/install/pass-car/8...-town-car.html
Senior Member
Has anyone ever used SPC camber bolts to fix camber issues on lowered cars? (there is a video in the link below)
http://spc-tv.com/install/pass-car/8...-town-car.html
Weißbirke Plünderer
Mine is not lowered, but I have them on my Marauder
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Scream Baby Scream
I placed an order for them.
+1 on my car not being lowered.
Gotta get Carfixers alignment specs & mine is maxed out per alignment shop I went to.
Hopefully this will solve the issue and the excessive inner tire wear.
Senior Member
It's a lot of work to install these. I did the K member filing to max out my stock adjusters and it was a pia.
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
Senior Member
I figure its going to be, especially since I don't have a lift.Originally Posted by BigCars4Ever
Willing to meet up half way
Watching the install video, that looks like a lot of fun.............
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
Senior Member
The camber bolts are going in today, I expect alot of four letter words until I'm finished
Scream Baby Scream
So how was the install?
Was it a PIA with the four letter word over & over?
I got mine but I going to have my mechanic friend do the install.
Senior Member
About an hour after my last post I got a call from work to go to Eugene, Oregon. I left almost right away and didn't have a chance to install the bolts. I plan on doing them tomorrow morning.
Senior Member
I wish I knew that the studs came out of the k-member for the rack like that. That would have made it much easier!
If you’re in control, you’re not going fast enough. – Parnelli Jones
If your wife's having a good time and you're not, you're still having a better time than if you're having a good time and she's not. - Red Green
2004 Marauder 300A - Garage Queen
1025 of 3213. It is one of 1237 in black and one of 2000 w/o the moonroof option.
Performance
4:10's, rear Adco, front Eibachs w/ KYB shocks, Working oil pressure gauge, JLT CA Kit, Fumoto Oil Drain Valve, TCE SS Brake Lines, Zack big brake kit.
Dress
Power by Ford coil covers, Maruder sill plates, God's head steering wheel emblem, spoiler, front and rear splash gaurds, Custom dead pedal, LED lights for engine bay, interior and gauges. 64' Marauder Sail Panel for rear badge, custom God's head badge in grill.
LOC: Clermont Florida
424HP@412TQ/13.61@103 IN QTR
why not just cut the flags of the stock bolts?
Senior Member
This was already done, the slots in the frame were not long enough.
I did the install today, it wasn't a bad job, about 4 hours with the car on jackstands. It took me a while because I decided to hand file the slots for better control of the holes I was making. Some might think I'm nuts for doing it this way, I call it love for my Marauder.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
