got the message...I appreciate it...I'm dying over here with the brake squeal Thanks!!
got the message...I appreciate it...I'm dying over here with the brake squeal Thanks!!
I'm back Wes!
It's been almost six weeks since you last contacted me about this and still no resolution or logo caps. I have nearly lived another life since I ordered these FEBRUARY 12, 2009.
I am hoping that the supplier didnt ship to that old Paypal address you have on the PM you sent before....I changed addresses three months ago to Daytona Beach!
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
Check your PMs!
'15 F250 CC 4WD 6.7L PSD
'11 CVLX
'05 E55 AMG
'91 350SD Turbodiesel
'97 Land Cruiser/78 Land Cruiser
Rich - your eloquence is noteworthy, dude!
Taking it a bit further for my case, good things are worth waiting for. I still have boxes full of goodies all over the house waiting to be installed.....
Every once in a while I buy another box to add to the collection.
At this rate, it will be very, very good! It HAS to be, waiting this long.......
Chip
Thank you for your quick response Wes!
Those babies are going to take a while folks...but my suggestion is whenever they come in...ORDER THEM!
2003 300A
Widened Rear Wheels with 295 45 Nitto G2's
Eaton Swapped by Curless
Brake Upgrade
Mo's Tune
JLT Intake
Addco Sway Bars
ADTR Coil Over Suspension
Metco Control Arms & Watts Link
SW Headers and Exhaust
Accessories By FastBlackMerc
4.10 Gears
Aeroforce Gauges
Pantherlights Headlamps
I never got the replacement tool that was discussed awhile back in another thread. Are those on backorder too?
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
Fordnut,
I mailed you my personal spare tool a while back. You never got it?
I'll take my caps off today and ship you my tool and get more from the vendor.
'15 F250 CC 4WD 6.7L PSD
'11 CVLX
'05 E55 AMG
'91 350SD Turbodiesel
'97 Land Cruiser/78 Land Cruiser
Allen,
These caps have always been group buy items since I started offering them in batches in 2004. Because you ordered after the group buy date, I still want to fufill your order, so I placed an order for another quantity to meet your request.
WHen they come in, I'll have another batch, minus you and a few other people, after that I probably won't be offering them again, since 90% of the people on this board already have them.
I'll continue to push Logo Caps for updates.
'15 F250 CC 4WD 6.7L PSD
'11 CVLX
'05 E55 AMG
'91 350SD Turbodiesel
'97 Land Cruiser/78 Land Cruiser
Anymore gas bibs?
"Damned if I do, damned if I don't!"
Member #8831
MERIDEATH aka "Purrrty Mean" was born on June 20, 2002.
Production #1685 of 7,838 and is #1685 of 7093 Black Beasts.
Delivered July 27th 2002, she revealed herself.
Unable to be tamed by her 1st owner, she was left to roam about & raid in search of plunder.
Through the pillage she became mine on January 23, 2008 and since then...
"She's tryin' to make a Devil out of me!"
-"TaKe 'Em D0wN!" TRILOGY TwinScrew #209 / TS0019-
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
My first experience with Wes two years ago was great! Got the order within a week. The second order a few months ago was 180 degree different. After waiting six weeks and several PM's/E-Mails he finally told me two of the three items I ordered were out of stock. The third was in stock and would be shipped the next day. After waiting two additional weeks and not receiving the third part, I e-mailed him and told him to forget sending the third part, I thought eight weeks was too long to wait for an in stock item, and six weeks was too long to discover the other parts were out of stock. I have turned to other sources.
From the movie "Dirty Mary, Crazy Larry"...
Hanks: So, what's my top end on this?
Steve: Unnnnlimited!
(Former proud owner of two Marauder's, a 2003 Black and a 2004 D.T.R.)
Well, here it is June 24 and the problem?? 5 months for brake rotors. 4 months to find out it would still be a few weeks before Baer actually "made" the rotors, and the remaining month with no real updates as to when I will get the Powerslots I switched the order for.
That whole "fined, aged spirits" quote was nice, but I finished an entire bottle of Louis XIII alone and still no rotors...how is that for fine, aged spirits??
Crazy right??
There's no excusxe for waiting that long. Vendor= FAIL.
2003 300B BLACK
--FMS 4.10's--Kook's full length headers/full exhaust/Magnaflows--Reinhart Auto SCT Xcal Tune--Precision Industries 3,500 stall
--CHE Sparta CA's--KBB BAP--GT500 FP--Eaton Detroit True Trak Diff--and of course......
Vortech A2A V2 T-Trim 12psi. 513hp, 461 ftlbs on 104 octane race tune
11.736@118.03
www.jandmmotorsports.com
"At my signal.....unleash Hell."
"If Darth Vader drove a car, it would be a Marauder."
The worst part is after 2 emails and 1 pm on here the only response i got was "let me check on that for you" to answer the first email and no response to the other two..... seriously
There are currently 1 users browsing this thread. (0 members and 1 guests)