I purchased Addco Front and rear bars 11 years ago. Now I need new bushings so I called Addco and they asked for part number. I thought there was only 1 that fit our cars. I purchased them from DR. Anyone have the part number of the bars he offered?
Contributing Member
I purchased Addco Front and rear bars 11 years ago. Now I need new bushings so I called Addco and they asked for part number. I thought there was only 1 that fit our cars. I purchased them from DR. Anyone have the part number of the bars he offered?
2003 300A
black
K&N CAI
XCAL2 (DENNIS REINHARDT)
blue inserts
GODSHEAD oil cap (COLEX)
GODSHEAD badging(CARMOTORSPORTS)
flowmaster super 40s
silverstars
BADGELESS GRILLE(2ND OWNER)
DRILLED/SLOTTED ROTORS
NAPA CERAMIC PADS
PROGUARD(DENNIS REINHARDT)
ADDCO FRONT AND REAR SWAYS(DENNIS REINHARDT)
MACH 1 CHIN SPOILER(INNNOVATIVE INTERCEPTORS)
Weißbirke Plünderer
there are solid and hollow ones which are bigger in dia. thus the part number difference
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Everything Marauder, LEDs & HI
Most likely you have solid ones.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Mercury Fan
I believe it is 650.
04 MM Silver Birch/Light Flint, HS, TO, 6CD, #597 of 3214 (sold 5/2014)
06 MGM LS Ultimate w/HPP, Black/Dark Charcoal
04 MGM LS Ultimate
69 Marquis convertible, 429
95 F250HD 7.3 4x4
48 Ford F4
Weißbirke Plünderer
650 - rear 1"dia bar
2196 - front 1.250 dia. bar
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Everything Marauder, LEDs & HI
Personally I'd go with greasable Energy Suspension bushings.
Greaseable Sway Bar Bushings - Energy Suspensions
Front – 9.5165 or 9.5172
Rear – 9.5161 - you will need to do some fabing to get these to work.
Front Swaybar End links:
Moog - K80140 - greasable
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Contributing Member
thanks for all the info!
2003 300A
black
K&N CAI
XCAL2 (DENNIS REINHARDT)
blue inserts
GODSHEAD oil cap (COLEX)
GODSHEAD badging(CARMOTORSPORTS)
flowmaster super 40s
silverstars
BADGELESS GRILLE(2ND OWNER)
DRILLED/SLOTTED ROTORS
NAPA CERAMIC PADS
PROGUARD(DENNIS REINHARDT)
ADDCO FRONT AND REAR SWAYS(DENNIS REINHARDT)
MACH 1 CHIN SPOILER(INNNOVATIVE INTERCEPTORS)
GAME OVER, YOU LOSE!
So the Addco parts dept knuckleheads couldn't ask you a couple simple questions and send you the part you need. That's just lazy on their part.
Senior Member
My thought exactly. A binary choice, coulda nailed it down... "Did you pay extra for the larger hollow tube bar, or buy the regular solid one?"
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
Contributing Member
I have the solid one
2003 300A
black
K&N CAI
XCAL2 (DENNIS REINHARDT)
blue inserts
GODSHEAD oil cap (COLEX)
GODSHEAD badging(CARMOTORSPORTS)
flowmaster super 40s
silverstars
BADGELESS GRILLE(2ND OWNER)
DRILLED/SLOTTED ROTORS
NAPA CERAMIC PADS
PROGUARD(DENNIS REINHARDT)
ADDCO FRONT AND REAR SWAYS(DENNIS REINHARDT)
MACH 1 CHIN SPOILER(INNNOVATIVE INTERCEPTORS)
Contributing Member
I sent 2 emails and got no response and then I called and a woman answered and she seemed to be more of an admin person than a tech. Now that I have the part number I'll try once again to call them.Originally Posted by Mr. Man
2003 300A
black
K&N CAI
XCAL2 (DENNIS REINHARDT)
blue inserts
GODSHEAD oil cap (COLEX)
GODSHEAD badging(CARMOTORSPORTS)
flowmaster super 40s
silverstars
BADGELESS GRILLE(2ND OWNER)
DRILLED/SLOTTED ROTORS
NAPA CERAMIC PADS
PROGUARD(DENNIS REINHARDT)
ADDCO FRONT AND REAR SWAYS(DENNIS REINHARDT)
MACH 1 CHIN SPOILER(INNNOVATIVE INTERCEPTORS)
GAME OVER, YOU LOSE!
Hopefully someone there is bright enough to hit the transfer button if you don't get 'parts' on the first hit. Good luck.
THE SUNSHINE STATE MARAUDER'S
I did mine last year. Addco front bar is 1 1/4 thick" Bushing With bracket Part # 2196 ". Or you can stop by a Advance Auto and get the grease able ones from Energy Supression for a 1 1/4 inch bar" Bushing with bracket part # 9.5165 ".
GAME OVER, YOU LOSE!
Should this read bushing w/ bracket for a 2196 bar?
THE SUNSHINE STATE MARAUDER'S
The bushing's came with the small bracket that holds in place.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
