What are the torque specs on both pulleys to be tightend to crank? waterpump?
What are the torque specs on both pulleys to be tightend to crank? waterpump?
bm'03, I'll look in the service manual when I get home from work, if no one has the answer before then...didn't want you to think we were ignoring you...
The Blackbird
Trilogy #61
Driveway Queen
The Spruce Goose
2004 Grand Marquis LS Limited Edition
Daily Driver
Originally Posted by bigmerc'03
Four bolts holding on the water pump pulley: 25 Nm (18 lb-ft).
Crankshaft pulley bolt: "Install the bolt and washer. Tighten the bolt in four stages. Stage 1: Tighten the bolt to 90 Nm (66 lb-ft).
Stage 2: Loosen the bolt one full turn.
Stage 3: Tighten the bolt to 50 Nm (37 lb-ft).
Stage 4: Tighten the bolt an additional 85 to 95 degrees.
So sayeth the shop manual.
thank alot!!!!!!!!!!!!!!!!!
There are currently 1 users browsing this thread. (0 members and 1 guests)