-Mike
"A common mistake people make when designing something completely foolproof is to underestimate the ingenuity of complete fools." - Unknown
'03 Black Canadian 300A -Born 11/14/02, Adopted 04/05/05
#6018 of 11,052
Trilogy #196 - Self-installed
Stuff done to it. See here.
Any photo of the project in progress ? Did you have to use 90 degree bend brake lines ?
2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
2003 marauder black 28,000 miles all stock. Garage Queen.
2004 marauder red daily driver.
"Beast, Jr."
2003 300 A, 4.10:1 gear, JLT CAI, Marty tune, Nitto 420S and 555 tires, NGK TR55 plugs, J-mod, Skull lock knobs, and a new windshield
Hello everyone. Mike from Dallas here. I work for advance auto parts. I can get pricing on Saturday for the GT500 rotors and C5 brake calipers. I'll also look at Keystone to look at Stop Tech brake rotors for the front and rear. I can order drilled, slotted, drilled and slotted rotors with or with out Cryo Treatment. Btw Zack and Lji_372 I sent you guys message about buying the brackets.
Thanks Mike.
GT500 calipers will not work on a MM....
Been there done that!
I searched this thread and didn't find the outcome from a guy who posted a similar question, so I hope this is not repetitive.
Will this setup work with c6z06 calipers? All else being the same? I have 19 inch wheels. Thanks.
Does TCE still provide the brake lines? If so, do we have to reach directly out to TCE about the brake lines, or is there a link I’m missing somewhere?
Link is in the vendor forum.
http://www.tceperformanceproducts.com/
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Question for those with the front kits...
Anybody notice a difference when trying to foot brake at the track? Last year I could foot brake and hold the car to about 3200 rpm to launch. This year it's around 2600-2700 before I start pushing through the brakes.
My thought process was maybe the corvette calipers were a bit larger and not upgrading the master cyl to displace more fluid might be the source. When we upgrade our axles in jeeps with larger brakes we have to go to larger master cylinders.
My brakes feel fine, good firm pedal, stops great etc. Just can't foot brake like I could.
Torn between a possible brake change or my torque converter. It's the same converter as last year, but I did have the company I got it from cut/clean it over the winter to renew my warranty.
2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
#BSTDMRC #LSSWAPPEDMARAUDER
Instagram -
Cheapthrillb2
lsswappedmarauder
There are currently 4 users browsing this thread. (0 members and 4 guests)