Hello guys my name is Bob and thought I would share a project that I am working on. My brother decided he wanted a hot rod and wanted something different from your usual mustang or camaro. He decided he wanted a newer model grand marquis or crown vic. So we started searching a for a car and was looking a lightly damage ones to try to get less expensive start and found a nice 2010 grand marquis hit lightly in the front. Then it was time for a donor to get everything out of. He purchased a 2014 mustang gt and a 2015 mustang gt. We have already installed metco upper and lower control arms. Also installed the metco watts link. The whipplecharger is already ordered. He ordered the all new gen 3 2.9 charger. We are hoping next 3 to 4 months we should have it completed. I am hoping 96 gt4.6 chimes in cause its his thread that has been a big help and also to just to pick his brain about a few things. I guess that's it for now. I will post up more as we progress and if there is any questions ask away. Here are a couple of teaser pics.