Just curious has anyone restored their foglights before? Mine were getting water in them for awhile and now the inside housing is like a brown color.. Can we paint the inside if that chrome??
Sent from my SM-G965U using Tapatalk
Just curious has anyone restored their foglights before? Mine were getting water in them for awhile and now the inside housing is like a brown color.. Can we paint the inside if that chrome??
Sent from my SM-G965U using Tapatalk
Buy new ones, available on eBay, same as Mazda Miata and MPV. Or get LED from panther lights.com
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
If you're asking how to re-chrome the bowls (good luck!) and seal the glass, it's obviously time for new ones. Seriously, I doubt you have the cerium oxide sitting around you'd need to polish out the pitting in the lenses either.
3W3Z-15200-AB is the Part # for the fog light, it's 77 per side from tousley ford
https://parts.autonationfordwhitebea...Y4LWdhcw%3D%3D
The fog light bracket, which I bet you'll need at least one of because they seem to all snap off at the bottom on higher mile cars, is 3W3Z-15266-AA
https://parts.autonationfordwhitebea...Y4LWdhcw%3D%3D
If you're not ready to buy new ones, wait til you're ready to buy new ones. You're not going to get a reflective coating on the inner bowl with off the shelf "chrome spray paint"
2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005
2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
2063/3214
(Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
5377/7838
2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB
1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors
There are currently 1 users browsing this thread. (0 members and 1 guests)