http://www.youtube.com/watch?v=MC5qm_JhHUMI don`t know if you have seen this John but I found it looking around
http://www.youtube.com/watch?v=MC5qm_JhHUMI don`t know if you have seen this John but I found it looking around
Last edited by Hack Goby; 07-24-2007 at 08:43 AM.
That's great! More cooked rice
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Nice run john, that was lunch, what was for dinner ?
James Brown #140 "Say It Loud" Except in Bristol
Merc's Garage
MagnaFuel ProTuner Series 750 MP-1403
Stainless Steel Works full exhaust
SCT Advantage III Ford Pro Racer Software
600.59 rwhp 559.91 Torque @ 20 lbs Boost
2.3 Whipple Intercooled Supercharger
BC Automotive Stage4 transmission
03 Terminator built by Chris Vining
Had to actually turn down my speakers when my eardrums started ringing from that garbage exhaust on the ricer..
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
Ive seen that before, look i even put up an intelligent comment
2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005
2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
2063/3214
(Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
5377/7838
2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB
1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors
Your car moves pretty good John, what else do you have besides the MM engine? Is the engine "tampered" with?
'03 A #1801 - Tuned By Outlaw Dyno
445rwhp/408rwtq - 12.6/110mph
DR Vortech NOIC #5
Sold
'88 Mustang LX - Built 306ci, built AOD, built 8.8"
'11 F250 Powerstroke - 476hp/1208tq
The valve covers have never been off. It has a 4.10 gear and a tricked out transmision with a 3200 stall converter. Underdrive pulleys MSD ignition Kooks headers Stage 2 intake manifold and a good tune. 310 HP at rear wheels 323 torque. 13.56 best ET.
[SIGPIC]
Damn man that's good. How come some of us MM guys can't even accomplish over 300 at the rear wheels with a lot more invested? Also what do you mean by a Stage 2 intake manifold? I thought there was no other manifolds for our engine?
'03 A #1801 - Tuned By Outlaw Dyno
445rwhp/408rwtq - 12.6/110mph
DR Vortech NOIC #5
Sold
'88 Mustang LX - Built 306ci, built AOD, built 8.8"
'11 F250 Powerstroke - 476hp/1208tq
Its a extruded honed intake and is stock from the outside. Use the search for more info. They are expensive and the gain on HP is not a lot. The headers and the intake added 27 hp. They were put on at the same time.
[SIGPIC]
There are currently 1 users browsing this thread. (0 members and 1 guests)