Awesome. I know they are really pricey.
Awesome. I know they are really pricey.
Do you have longtubes? That would be bananas
Picking up a brand new tial 44mm bo wastegate tomorrow. Got it for under 300
What Meth Kit are you using?
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Well I bought the snow stage 2 kit but the only things I'm using is the controller and the pump, I wanted to switch to braided lines /fittings, so I contacted Rodney Michels from prometh and got this bad ass tank and ss line kit with a couple nozzles. He gave me a great deal too
Sent from my SAMSUNG-SM-G930A using Tapatalk
Smart choice - "I wanted to switch to braided lines /fitting".
Recently fixed 2 10 year old tension hose fittings that started to leak.
I have both a non-meth street tune and a racing meth tune. It's best to run the meth pump every month.
I suggest you have a method of checking the tank levels to make sure the system is working and to catch any leaks.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Thanks, yea I installed a sight tube in the side of the box, I have a little green led to show voltage to the pump, but that's all I got for now. I want to install a "purge/test" button or possibly even a flow gauge, but I need to find a good one
Sent from my SAMSUNG-SM-G930A using Tapatalk
Makin moves, found brand new for pretty cheap 44mm
Sent from my SAMSUNG-SM-G930A using Tapatalk
Want going to chance anything with these plastic crimped on side tanks.
Sent from my SAMSUNG-SM-G930A using Tapatalk
It's been like Christmas lately, just a bunch of flanges and fittings and hose, etc... You know, the little things that add up like no other...
Also got my fuel cell in, everything fits in the trunk so nice, battery will be on the left.
I have everything for the fuel system now. Just need to modify the factory fuel hat to make it straight and short, add a little baffling for the socks, mount it in the tank and plumb my hoses/fittings.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Also is it possible for a mod to rename this thread to "rear mount turbo build" if not I can just make a new one then
Sent from my SAMSUNG-SM-G930A using Tapatalk
Julio Don Alky Control should have a fluid level sensor you can use, and it turns on a light to let you know your low. I always fill the meth bottle before taking the car for a spin, it can slosh back and suck air if its too low.
He has a lot of options, check him out, he is in tampa florida.
https://www.alkycontrol.com/
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
Pretty kewl! Good luck with the build, seems like you have a good plan
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
There are currently 1 users browsing this thread. (0 members and 1 guests)