Does anyone have the part number or know where to get the rubber adapter that does from the plastic pcv hose to the intake manifold? Mine is dry rotted and has been leaking for a while now and I just realized it after my car kept dying.
Does anyone have the part number or know where to get the rubber adapter that does from the plastic pcv hose to the intake manifold? Mine is dry rotted and has been leaking for a while now and I just realized it after my car kept dying.
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
The one on here?
Yep this guy right here
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
I guess they don't sell just the single adapter part
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
Just a few hoses, if it's a beater use heater hose
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
I ordered the part. It is my daily driver and I definitely care about keeping it nice. I've got it temporarily rigged right now but I don't like it for a permanent fix. This must have been an issue for a long time, because the car feels more powerful now. Such a silly way to be driving around, but my car typically does sit for weeks and months at a time while I'm on business trips.
2003 Marauder 300A
#2928 of 7838
Build date: 8/6/02
Ship date: 5/28/03
14.33 @ 96.82 with OLD engine
6R80 swap in progress
1968 Chevelle
NA/Pump Gas 10.4 @ 128 mph
416/4L85E LSA Supercharged build underway
And the part number is, please?
Sent from my SM-N950U using Tapatalk
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Sorry, I just had eye surgery for cataracts and I can't read tiny print like that yet.
Sent from my SM-N950U using Tapatalk
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
3W3Z-6C324-AA
Thank you, Zack. I bought some temporary over -the-counter reading glasses so I can use my phone and laptop again.
Sent from my SM-N950U using Tapatalk
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
You guys are too funny!
Yes, but always oh so helpful.
Sent from my SM-N950U using Tapatalk
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Nevermind...
There are currently 1 users browsing this thread. (0 members and 1 guests)