Part number 11256 is for a 2.50 inch diameter exhaust. Is that the size of the stock exhaust?Originally Posted by Marauderjack
I have Magnaflow #11256's on my car now.......sound nice with zero drone!!
03 Blue Marauder
Part number 11256 is for a 2.50 inch diameter exhaust. Is that the size of the stock exhaust?I have Magnaflow #11256's on my car now.......sound nice with zero drone!!
Senior Member
I guess it is....welded right up!!
No Marauder
Closed
Found this info.................
2 inch from manifolds to the mufflers , then out the mufflers- 2 1/4 tail pipes to the tips.
Senior Member
I've had so many compliments on the Magnaflow 11256 I can't count them all.
STILL N/A
Yes...tailpipes are 2-1/4" diameter.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
Member
Are these it?
Sent from my LM-G710 using Tapatalk
Weißbirke Plünderer
Are these it?
Sent from my LM-G710 using Tapatalk
the member you are asking is banned, no longer here
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Member
Oh!!!! Didn't know that.. Thanks!
Sent from my LM-G710 using Tapatalk
Member
So will these fit my Marauder? Mine is stock.
Thank you
Sent from my LM-G710 using Tapatalk
Weißbirke Plünderer
Almost any offset in, center out muffler will fit, they will all need welding to make the connection.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Member
I have a pair of factory stock Marauder mufflers with around 43,000 miles on them $75.00 shipped to your door.
Senior Member
Magnaflow here as well. Just enough growl without it sounding like a POS.
2003 Mercury Marauder 300A
Former Owner: Joe Walsh
2015 Mustang GT PP
Guard Metallic Exterior
2018 F-150 King Ranch
2WD, 3.5 EcoBeast
Senior Member
Fire Captain at firehouse next to my office walked over with his entire battalion to tell me my Marauder sounded "Mean... Tough... In a good way!"
All his guys nodded. I figured that is one of best single compliments a sleeper car can receive (without a supermodel attached)!
Last edited by 1Marauder; 12-02-2018 at 11:09 AM.
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
