Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Carbon fiber intake tube

  1. 11-27-2010, 04:22 PM #1
    MMM2003's Avatar
    MMM2003
    MMM2003 is offline Contributing Member
    Join Date
    Dec 2002
    Location
    Madison, WI
    Age
    52
    Posts
    874

    Carbon fiber intake tube

    This is off my 2003 Marauder. Took it off prior to selling it.

    This was originally produced by Metco. It is real carbon fiber. Not painted!

    Please note, this does not offer any performance gains. It is purely for looks and show. It does eliminate the snorkel and provides a smoother path for the air from your stock airbox.

    This unit will bolt to your stock intake and airbox. It connects right after your MAF and uses the same clamping ring from the OEM intake tube.

    Don't know if it will work if you have a CAI or S/C.

    Pic 1
    Pic 2

    $200 shipped to you.

    Email with any questions.
    pcdettmer@gmail.com

    Thanks,

    Peter aka MMM2003
    300A Stock MM03 born on 6/25/2002 - sold June 2010!
    (owner from 8/26/2002 - June 2010)

    - Production# 2003 of 7838
    - @17000miles 1/4 in 15.1s@93.3mph
    - 180 TStat
    - 235/50/18 on all four corners
    - Dyno tune by SCT (Jerry W.) on 04-03-04
    @ 260.7 hp/285.5 ft-lbs
    - Front and rear EBC brakes with SS lines
    - PHP upper & lower rear control arms
    - Metco C/F intake tube
    - Infinity speakers
    Reply With Quote Reply With Quote
  2. 11-27-2010, 05:16 PM #2
    Blackened300a's Avatar
    Blackened300a
    Blackened300a is offline Sinister with style
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    48
    Posts
    12,182
    Just to help the sale. These were over $300 new and I personally think they are the nicest intake tubes ever produced.

    2003     MERCURY MARAUDER 300A
    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage


    Reply With Quote Reply With Quote
  3. 11-27-2010, 05:30 PM #3
    MMM2003's Avatar
    MMM2003
    MMM2003 is offline Contributing Member
    Join Date
    Dec 2002
    Location
    Madison, WI
    Age
    52
    Posts
    874
    Quote Originally Posted by Blackened300a View Post
    Just to help the sale. These were over $300 new and I personally think they are the nicest intake tubes ever produced.
    Thank you! I couldn't remember how much they were new. I do agree, when cleaned up and polished they are very nice!

    Looking really good in your engine compartment!

    Peter
    300A Stock MM03 born on 6/25/2002 - sold June 2010!
    (owner from 8/26/2002 - June 2010)

    - Production# 2003 of 7838
    - @17000miles 1/4 in 15.1s@93.3mph
    - 180 TStat
    - 235/50/18 on all four corners
    - Dyno tune by SCT (Jerry W.) on 04-03-04
    @ 260.7 hp/285.5 ft-lbs
    - Front and rear EBC brakes with SS lines
    - PHP upper & lower rear control arms
    - Metco C/F intake tube
    - Infinity speakers
    Reply With Quote Reply With Quote
  4. 11-27-2010, 05:33 PM #4
    Blackened300a's Avatar
    Blackened300a
    Blackened300a is offline Sinister with style
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    48
    Posts
    12,182
    Quote Originally Posted by MMM2003 View Post
    Thank you! I couldn't remember how much they were new. I do agree, when cleaned up and polished they are very nice!

    Looking really good in your engine compartment!

    Peter
    Thanks! I also forgot to mention how rare these are. When I was offered one to purchase I didn't hesitate.

    2003     MERCURY MARAUDER 300A
    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage


    Reply With Quote Reply With Quote
  5. 11-27-2010, 10:01 PM #5
    Joe Walsh's Avatar
    Joe Walsh
    Joe Walsh is offline STILL N/A
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    64
    Posts
    11,666
    I have to agree with Paul!.....



    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
    Reply With Quote Reply With Quote
  6. 11-27-2010, 10:22 PM #6
    MercOut's Avatar
    MercOut
    MercOut is offline Senior Member
    Join Date
    Apr 2007
    Location
    Maryland
    Age
    36
    Posts
    515
    Will this work with the JLT CAI?
    '03 MM 300A
    Bought from and Tuned by Zack
    4.10 Gears, Rear Sway Bar, Dynotech Driveshaft
    Art Carr Trans, Rear Cooling Mod,Scanguage II
    Kooks Headers w/ 2.5" Stainless Steel Exhaust
    HID fog & headlights, JLT CAI
    Reply With Quote Reply With Quote
  7. 11-28-2010, 04:06 AM #7
    Blackened300a's Avatar
    Blackened300a
    Blackened300a is offline Sinister with style
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    48
    Posts
    12,182
    Quote Originally Posted by MdRider88 View Post
    Will this work with the JLT CAI?
    Yeah, you'll just use the filter.

    2003     MERCURY MARAUDER 300A
    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage


    Reply With Quote Reply With Quote
  8. 11-28-2010, 07:59 AM #8
    SC Cheesehead's Avatar
    SC Cheesehead
    SC Cheesehead is offline 'God Speed Blues Brother'
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    If I hadn't gone PSI, woulda snapped it right up. Good price for a rare part.

    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.


    Reply With Quote Reply With Quote
  9. 11-28-2010, 09:15 AM #9
    Spectragod's Avatar
    Spectragod
    Spectragod is offline Willing to meet up half way
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    PM sent, if it's still available, I'll take it.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "

    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!




    Reply With Quote Reply With Quote
  10. 11-29-2010, 08:23 PM #10
    boatmangc's Avatar
    boatmangc
    boatmangc is offline + '10'11'12' best of show 2013
    Join Date
    Aug 2009
    Location
    Florida Keys
    Age
    63
    Posts
    3,636
    Dang, I had to spend a couple of days off the board.
    If Spectragod doesn't buy it I am there for sure!
    It's all BS until you can show me the time slip!

    Trilogy #36
    #2529 of 7839
    See Garage for mods.
    O bsessive
    C ar
    D etailer

    SOLD

    2014 Caddilac CTSV Wagon
    CAI
    DRs
    11.70 @ 119 mph
    505 RWHP at Mo's untuned.


    10/16 mods
    Ported blower. LTs catless mids, flex fuel kit, pulleys, badness.
    621/626 on E49 tuned for E85
    10.65 @ 128.9 SSHS16
    Reply With Quote Reply With Quote
  11. 11-29-2010, 08:25 PM #11
    boatmangc's Avatar
    boatmangc
    boatmangc is offline + '10'11'12' best of show 2013
    Join Date
    Aug 2009
    Location
    Florida Keys
    Age
    63
    Posts
    3,636
    I want the CF radiator cover too.
    It's all BS until you can show me the time slip!

    Trilogy #36
    #2529 of 7839
    See Garage for mods.
    O bsessive
    C ar
    D etailer

    SOLD

    2014 Caddilac CTSV Wagon
    CAI
    DRs
    11.70 @ 119 mph
    505 RWHP at Mo's untuned.


    10/16 mods
    Ported blower. LTs catless mids, flex fuel kit, pulleys, badness.
    621/626 on E49 tuned for E85
    10.65 @ 128.9 SSHS16
    Reply With Quote Reply With Quote
  12. 11-30-2010, 04:39 AM #12
    Blackened300a's Avatar
    Blackened300a
    Blackened300a is offline Sinister with style
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    48
    Posts
    12,182
    Quote Originally Posted by boatmangc View Post
    I want the CF radiator cover too.
    Thats just as rare as the intake tube. Im still hunting for one myself.

    2003     MERCURY MARAUDER 300A
    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage


    Reply With Quote Reply With Quote
  13. 11-30-2010, 05:25 AM #13
    FordNut's Avatar
    FordNut
    FordNut is offline Contributing Member
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    Quote Originally Posted by Blackened300a View Post
    Thats just as rare as the intake tube. Im still hunting for one myself.
    Actually it's even more rare...
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods
    Reply With Quote Reply With Quote
  14. 11-30-2010, 05:50 AM #14
    Spectragod's Avatar
    Spectragod
    Spectragod is offline Willing to meet up half way
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by Blackened300a View Post
    Thats just as rare as the intake tube. Im still hunting for one myself.
    I need the intake tube to match the radiator cover I already have.
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "

    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!




    Reply With Quote Reply With Quote
  15. 11-30-2010, 07:31 AM #15
    boatmangc's Avatar
    boatmangc
    boatmangc is offline + '10'11'12' best of show 2013
    Join Date
    Aug 2009
    Location
    Florida Keys
    Age
    63
    Posts
    3,636
    Quote Originally Posted by Spectragod View Post
    I need the intake tube to match the radiator cover I already have.
    Lucky......
    It's all BS until you can show me the time slip!

    Trilogy #36
    #2529 of 7839
    See Garage for mods.
    O bsessive
    C ar
    D etailer

    SOLD

    2014 Caddilac CTSV Wagon
    CAI
    DRs
    11.70 @ 119 mph
    505 RWHP at Mo's untuned.


    10/16 mods
    Ported blower. LTs catless mids, flex fuel kit, pulleys, badness.
    621/626 on E49 tuned for E85
    10.65 @ 128.9 SSHS16
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. carbon fiber intake tube
    By burt ragio in forum Community Discussion
    Replies: 5
    Last Post: 08-31-2009, 05:08 AM
  2. F.S. Metco carbon fiber intake tube
    By Spectragod in forum Marauder-specific Parts for Sale
    Replies: 0
    Last Post: 03-13-2009, 11:06 AM
  3. WTB: Metco Carbon fiber intake tube
    By J D in forum Marauder Parts/Misc. Wanted
    Replies: 10
    Last Post: 06-16-2008, 05:56 AM
  4. Wanted: Carbon Fiber Intake Tube
    By marales in forum Marauder Wanted
    Replies: 1
    Last Post: 03-27-2008, 12:57 PM
  5. Metco Carbon Fiber Intake Tube
    By Black 04 in forum Community Discussion
    Replies: 0
    Last Post: 01-13-2007, 05:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules