I have a friend who has a 4v Cobra with a spare set of valve covers to sell, is $125 a fair price for them? I can't remember how much a used set has gone for on here or what the Ford Racing ones go for.
Thanks
I have a friend who has a 4v Cobra with a spare set of valve covers to sell, is $125 a fair price for them? I can't remember how much a used set has gone for on here or what the Ford Racing ones go for.
Thanks
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
Sounds fair to me.
Double check the PCV location.
04 Crown Victoria Sport
2008 Harley Davidson Nightrain- sold....
2016 Harley Davidson Street Glide - Olive Gold
1995 F150 4x2 4.9 5spd
1995 Schwinn High Plains 21 speed, custom gearing.
$100 is typical for the MM ones. Are you paying extra for a cobra emblem??
2003 300A Black MM
3.73's, 3500 PI, T64e at 9.5 PSI
Belts are for washing machines.
Theme song (s) : Back in Black & Thunderstruck!!
Ride it like a Ford.!!
What would you do if you weren't afraid?
I'm not a gynecologist....but I'll take a look at it.
Their black valve covers with no coil covers.
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
The Cobra ones have a slightly different location for the PCV valve on the driver's side.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
The Marauder uses a bolt-in style PVC where as the mustang uses a rubber grommet pop-in style. I just lined up the holes and used a small drill bit to start then increased to about a 3/16 size, then just used the stock screws to tap the holes. Its been solid and tight since.
http://www.mercurymarauder.net/forum...+cover+install
2003 MERCURY MARAUDER 300A
Build Date
5/31/02
Sequence#
#363 of 7839 Black Marauders
Dyno tested power
450 RWHP & 405 RWTQ on 93 octane
Best 1/4 mile time to date
12.456@109mph
Visit my Garage
Blackened300a's Garage
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
There are currently 1 users browsing this thread. (0 members and 1 guests)