Nice work, is the rear of your car lowered at all?
Nice work, is the rear of your car lowered at all?
2003 300A
Build date 9/27/02
Sequence# 5244 of 7839
I have a few things done to it, Eaton swap next!
1993 Ford Taurus SHO-Every bolt on available...Awaiting a Turbo
2008 Ford F350 SD
1974 Ford F350 SCS
2011 Ford Flex Titanium, Ecoboost
www.cardomain.com/id/shofast
If you don't stand behind our troops; please feel free to stand in front of them!
No it is not
Looks good, I'll be making my over axle pipes 3in this winter just because
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
gotta love 3 inch exhaust one of the better but costlier mods I did to my marauder, full length tube headers with 3 inch all the way to the back with cutouts. I am in st.cloud by the way and have only seen one other marauder around here
Post up some pics of your setup.
Heres some pictures of before I installed the cut outs
Is that the older SW kit before they switched to 2.5"
Looks great!!!
Must be I had it installed at stainless works around 2011 its the long tube catted headers and full 3 inch cat back system. only issue I had was I blew the guts out on both cats one time they did replace them under warranty and the new ones I got were a bit differant, yes I have a trilogy but dang I am only pushing 9 psi never knew they downgraded to 2.5 inch
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Trilogy With Comp Cams Stage 3 Sound's
https://www.youtube.com/watch?v=GUIRJ1zGhSA
https://www.youtube.com/watch?v=AAUWZ9f8gXw
https://www.youtube.com/watch?v=mrPUl529gog
https://www.youtube.com/watch?v=KvfRjhiGT4w N/A Sound
Dyno By "Mo's Speed Shop",Dallas,Georgia https://www.youtube.com/watch?v=VqxN3FjWd6s
445 RW/HP @ 398 Torque S/C
Jeff Doing a Traditional Burn Out At "Mo's Speed Shop" https://www.youtube.com/watch?v=nCyKuC5heAI
So Far Best Run12.84 @106 MPH https://www.youtube.com/watch?v=dlA-0vB0HwU
Big "Thanks" To Gerald,Derek,Bill & Harrison
"Thanks" Martyo & Jeff
#6486 of 11,052 03 300B In Black
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
wonder why the change in sizing? I have had no fitment issues with 3 inch. I just had to double check on my car yes its 3 inch
Last edited by blackhueys; 11-25-2018 at 04:16 PM.
Worried about clearance issues with metco watts on lowered cars.
Sent from my SM-G965U using Tapatalk
There are currently 2 users browsing this thread. (0 members and 2 guests)