Also getting set to install a Moser M9 9" Chromemoly rearend with a matching custom TCE 15" rotor Wilwood Aero caliper brake setup!
Also getting set to install a Moser M9 9" Chromemoly rearend with a matching custom TCE 15" rotor Wilwood Aero caliper brake setup!
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
I bought a set of Jerrys ultra-sweet brackets for the Whipple swap which I had high polished then anodized red for a little under hood bling! I also did a set of Fore fuel rails.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Hopefully these wheels will tuck and not stick out! I am sure if you are doing the mini tub that you have carefully measured offset, etc. So what size tires? Do they make a drag radial to fit those rears?
Neil
2003 Mercury Marauder - DBP/DC
2003 Mercury Marauder - BLK/DC
2003 Mercury Marauder - SB/LF
2004 Mercury Marauder - DTR/LF
1964 Mercury Marauder - BLK/BLK
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Looks good so far, Roger!
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
I'm sure you already know this, but to fit a stock Terminator lower intake/heat exchanger, the Teksid block will need some grinding in the valley of the the block. Also the stock knock sensors will not fit, there are several ways around that. Not sure if you are keeping the knock sensors in the tune though.
Ex Panther Owner
Did you hit the lotto?
Those were the days.........
DANG THEY'RE CUTE!!!!!!
Smile and Nod
I love THIS bar
You should not drive any type of drag radial, street radial, slick or otherwise in the rain as I am sure you know. I think it is stupid that so many people with 500+hp cars run regular radial tires. I mean come on, really? But anyway, I asked the question because your last wheel/tire setup was not my favorite, just being honest. It looks like you are on your way to a winner this time around, cannot wait to see it. What size front tire?
Neil
2003 Mercury Marauder - DBP/DC
2003 Mercury Marauder - BLK/DC
2003 Mercury Marauder - SB/LF
2004 Mercury Marauder - DTR/LF
1964 Mercury Marauder - BLK/BLK
nice brackets!!! ill be getting me a set of eaton brackets from jerry in February or march.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Roger, I wasn't arguing I was agreeing with the tires. I stated my opinion about the last setup, and then complimented your new setup, and asked another question about it. I am failing to see the issue with engaging conversation about your build. That is what this thread is for isn't it? To show it off and discuss it? Either way, good luck with it.
Neil
2003 Mercury Marauder - DBP/DC
2003 Mercury Marauder - BLK/DC
2003 Mercury Marauder - SB/LF
2004 Mercury Marauder - DTR/LF
1964 Mercury Marauder - BLK/BLK
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
There are currently 1 users browsing this thread. (0 members and 1 guests)