Well last night we got started. Taking it apart went smooth and quick. I only had 1 knock sensor is this normal?
Well last night we got started. Taking it apart went smooth and quick. I only had 1 knock sensor is this normal?
Mark E. Sword
1964 Falcon AFX clone (Rommy Hammes)
1970 1/2 Falcon Cobra
2003 Marauder DPB #5 of 328
http://www.mercurymarauder.net/forum...ad.php?t=63629
Yes, 03's only have one, but both boss's need to be ground down. Good luck, and have fun!
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Where that crossover tube from?? It lQQks already fabbed did you do it?
Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...
91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....
It's from Dave.
http://www.mercurymarauder.net/forum...ight=swordfish
Mark E. Sword
1964 Falcon AFX clone (Rommy Hammes)
1970 1/2 Falcon Cobra
2003 Marauder DPB #5 of 328
http://www.mercurymarauder.net/forum...ad.php?t=63629
NICE. Good luck with the install!
2003 Mercury Marauder 300A
FRPP BOSS50 Block w/MMR 900S Stroker 5.3L DOHC 324ci 10:1cr - (321rwhp/360.5rwtq) - Tuned by AED
2006 Ford Mustang GT
FRPP FR3 Handling Pack|FRPP X Pipe w/GTA Exhaust|Steeda CAI|Hurst Shifter
(289rwhp/307rwtq)
2003 Chevrolet Suburban 2500 LQ4 6.0L LT 4WD
Cognito leveling Kit, Fox 2.0, BFG KOA2 Radial All Terrains, Magnaflow, K&N and 4.10 gears
Good stuff man.. Looking good..have fun..we are here for ya! And waiting for more pics...lol
Smoked 2003 300A Black MM, Avic D3, 6k HID's, Eaton conversion, J-Mod, JBA Stainless Ceramic Coated shorties, Modified Bassani X-pipe, flowmaster Super 44's,stock tips, Lowered and a big ol' grin Best ET 12.2 @111 on street tires...
91 Viper Red Gt, 6 point cage, old setup-kenne bell 14psi best ET 11.20's @ 126.xx spinning.. New setup- On3 turbo kit, race intercooler, 348 stroker boss block,80lb injectors, 2 step, Meth Injected Snow Stage 2kit, AFR 185's, Tremec 600, Fidanza 4.3 clutch blah blah blah....
Looking good Swordfish!
lookin good man, feel free to give me a ring if need be
2010 fusion se
oh yeah, whats that white wagon wheel on?
2010 fusion se
good luck man!
392 Challenger YELLOW JACKET
12.28@114 stock
Mark E. Sword
1964 Falcon AFX clone (Rommy Hammes)
1970 1/2 Falcon Cobra
2003 Marauder DPB #5 of 328
http://www.mercurymarauder.net/forum...ad.php?t=63629
What combination pulleys & fuel pumps are you going to use ? Keep the pics comming.
2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
2003 marauder black 28,000 miles all stock. Garage Queen.
2004 marauder red daily driver.
I have a 2lb lower 2.9 upper. GT fuel pump with a BAP. I had the 2 pumps Then Zack told me go with 1 and the BAP. I haven't worked on the car sense fri. I Worked 12 hr shift sat, sun, mon. Well sunday ended up being 15 hrs. I'll be back in the shop tonite. I have the SC on. I spent about 3 hours making the heat exchanger brakets. I'll put up pictures tonite or 1st thing in the morning.
Mark E. Sword
1964 Falcon AFX clone (Rommy Hammes)
1970 1/2 Falcon Cobra
2003 Marauder DPB #5 of 328
http://www.mercurymarauder.net/forum...ad.php?t=63629
very nice, thats alota pulley for a stocker though, may wana think about a bigger upper. i have a stock cobra upper if you want it.
2010 fusion se
There are currently 1 users browsing this thread. (0 members and 1 guests)