Page 1 of 3 123 LastLast
Results 1 to 15 of 45

Thread: A Proper Panther Intercooler Tank: Prototype Inside

  1. #1
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956

    Thumbs up A Proper Panther Intercooler Tank: Prototype Inside

    During my travels on Hot Rod Drag Week 2019, I was discussing with my friend and co-driver about how I'd love a real tig welded aluminum IC tank that can double as an ice box and accept some larger lines as I'm planning on redoing my intercooler system when the next engine goes in. We bounced ideas off each other and after drag week, he worked with his fabricator to come up with a prototype tank.

    He's looking to sell a minimum of 10 tanks, anyone interested in some extra coolant capacity for the IC system?

    Specs:

    Choice of -16an or -12an fittings (tank bung is -16an)
    4" clear lid
    ARP mounting hardware included

    Polished: $479.95
    Powdercoated (wrinkle black): $469.95

    Note: I'm not here to collect orders or take money, just looking for feedback









    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  2. #2
    Join Date
    Sep 2004
    Location
    Woodbridge, VA
    Posts
    1,623
    Looks nice! Needs a drain if you wanna keep packing ice at the track. I suggest not all the way at the bottom as to keep a prime to the pump.
    ~Chris

  3. #3
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Nice fab work!


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  4. #4
    Join Date
    Oct 2010
    Location
    Michigan
    Posts
    1,911
    I might be interested in one
    2004 Black Marauder: #2237 Born on 4/1/2004

    Eaton Swapped and a bunch of other goodies!

  5. #5
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by Blown3.8 View Post
    Looks nice! Needs a drain if you wanna keep packing ice at the track. I suggest not all the way at the bottom as to keep a prime to the pump.
    That was on my mind the other night and certainly something that can be added to the final product. I'll bring this up with the project lead.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  6. #6
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    I'm not interested but whats the volume on the tank?

  7. #7
    Join Date
    May 2003
    Location
    Wichita Kansas
    Age
    39
    Posts
    585
    Very nice. Price is great too IMO

    Joe
    2004 SB
    4.10's and a tune
    More to come

  8. #8
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    43
    Posts
    1,771
    Looks good...


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  9. #9
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    What is the capacity volume?

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  10. #10
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by MyBlackBeasts View Post
    What is the capacity volume?

    Roughly 1.25 gallons


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  11. #11
    Join Date
    Aug 2011
    Location
    Wisconsin
    Posts
    4,338
    I'm interested. TY

    WLB
    BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
    ______________________________ ___________

    BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
    #2912 of 7093
    Conceived 8/6/2002
    Delivered 9/19/2002
    Adopted 8/10/2011
    Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
    Pioneer 6x8 Front
    Legacy 600w 6x9 Rears
    JL 6.5 SubWoofer
    K&N CAI
    Window tint 50% rear/35% front
    FBM CHMSL with Strobe mod 7/1/12
    DR Deep Aluminum Trans Pan
    Sparta FOMOCO Racing 8.8 Girdle
    Mo's Dyno Tune
    Gorilla Nuts - The System
    Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
    Powder Coat Axle Housing 7/1/12
    CME HP Rear Control Arms & Watts Link 7/1/12
    ______________________________ ________________

    Rex "SC Cheesehead" Weinbender 11-14-13
    Ed "Baaad GN" Linthicum 8-6-2014

  12. #12
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by MyBlackBeasts View Post
    I'm interested. TY
    good stuff, I have the prototype en route and I'm going to test fit it on my car and check fitment. After that a group buy will most likely be posted online.


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  13. #13
    Join Date
    Nov 2002
    Location
    St. John, IN
    Age
    45
    Posts
    14,251
    What is the capacity of the tank when it is filled properly?
    Not maximum capacity.....working capacity

  14. #14
    Join Date
    Mar 2007
    Location
    Lehigh Valley, PA
    Posts
    5,956
    Quote Originally Posted by Zack View Post
    What is the capacity of the tank when it is filled properly?
    Not maximum capacity.....working capacity
    I'll check when I get it in my hands, figure its probably a gallon


    2016 Ford Mustang GT PP - Lund nGauge, BMR vertical links, MGW Shifter, BMR CB005

    2004 Mercury Marauder - Eaton M112, Billetflow 3.4, Accufab SBTB + Plenum, T-56 Magnum, 4.10s, Stainless Works LTs, 2.5" Exhaust, Borla Stingers, Ridetech Coilovers + Adj rear shocks, FX-R projectors, Wilwood 13" BNSL6 + FNSL4 BBKs, S55 Gauge Cluster
    440rwhp & 406rwtq Tuned by Adam @ Revolution Automotive
    2063/3214

    (Sold) 2003 Mercury Marauder - Stainless Works LT's, Stainless Works 2.5" Catback, JLT Intake, Mo's Xcal4 Tune
    5377/7838

    2000 BMW M5 - Evolve Intake, Evolve Alpha-N tune, Stoptech ST-40 BBK, UUC SSK, Dinan front STB, Dinan RSB

    1996 Ford Bronco - 4" lift, 35" BFG A/T's, Punisher Valve Body, MH1 Projectors

  15. #15
    Join Date
    Mar 2020
    Location
    New York
    Age
    30
    Posts
    24
    If there wasn't impending economic doom I'd definitely consider it. probably go as far as showing my mechanic and asking if it was worth it for the build we're doing
    I got a couple lean mean street fighting machines

    2003 Mercury Marauder
    1996 Chevy Impala SS
    2002 Toyota Corolla (RIP)
    2006 Chrysler 300 Touring

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Prototype Watch
    By fastblackmerc in forum Marauder Innovations
    Replies: 144
    Last Post: 06-03-2012, 07:55 AM
  2. Marauder Prototype???
    By Bowman9 in forum The Lounge
    Replies: 17
    Last Post: 02-21-2004, 10:07 PM
  3. Prototype drawing
    By CRUZTAKER in forum Trilogy Motorsports
    Replies: 24
    Last Post: 02-06-2004, 03:24 AM
  4. Proper recovery???
    By junehhan in forum Shop Talk
    Replies: 11
    Last Post: 01-27-2004, 11:16 AM
  5. gas tank explosion data on Panther platforms from the DOT
    By oradba in forum Community Discussion
    Replies: 2
    Last Post: 10-10-2003, 09:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •